PLRU1778ES6 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patricia from Pierre, SD
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The refrigerator door shelf bin was broken
The old shelf bin wouldn't stay in, so all I did was snap in the replacement piece. It was very easy and I am very pleased!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Topeka, KS
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken shelf
Took the shelf out of box and snapped it into refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Rockdale, IL
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf door broke.
I order the part from partselect.com and snapped the shelf in. Only took two minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BENJAMIN from KOKOMO, IN
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door shelf bin broke
Our repair was easy. No tools required. It was just popping it into place. I would like to say that we ordered our part and paid for regular dhipping and we recieved it the very next day! What great service! Thanks so much!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Inez from Muskegon, MI
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken door bin and shelf retainer bar
Two of my refrigerator door bins were broken and I had been using duct tape to hold them in place. I decided to look them up on PartSelect and was able to find exactly what I needed at a great cost. I ordered them and they came right away. I put them on the door needing no tooks and bingo, just like new! Imagine my heartache when one somehow broke. Well I contacted PartSelect and they sent me another one at no charge and in less than a week!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Delaware, OH
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The plastic clip that holds the shelf in place broke.
I aligned the right and left clips on the shelf with the tabs on the door and snapped the shelf in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Twentynine Palms, CA
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old shelf bin was broken.
It snapped right in place, less than 1 minute. Made he fridge much more uefull and way cheaper than buying a new fridge. I am gald that there are places that sell parts like this. THANKS. Also, shipping was extremely fast.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernest J. from Laredo, TX
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
shelf was overloaded, thus bin broke.
placed bin into the protruding plastic inplacement
and then just snapped it in its place.
and then just snapped it in its place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Martha K. from Kennerdell, PA
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door bin shelf guard broken
I slipped the new piece into place. That was it! I'm not really a do-it-yourselfer and that is why I didn't previously reply. This was no brainer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Stone Mountain, GA
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The door shelf bin hook on one side broke off
I looked over the suggested replacement shelf part at partselect , which included close up photos of how the fasterners worked. The door shelf bin was delivered quickly. The part was a perfect match and snapped in place without any issues!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- RAMONA from SANTA ANA, CA
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
shelf broke
really easy just popped it in and i was finished. Great service fast response on orders. thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Pleasant Hill, CA
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I broke the end of the door shef & couldn't make it work with glue.
Just snapped the piece in place. Fixed in less than 1 minute. The Lady on the phone was helpful in making sure I was selecting the right piece. Delivery was made in 2 days. I can't be more pleased. cw
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from henrico, VA
- Parts Used:
- 241639502
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Socket set
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from LEHIGH ACRES, FL
- Parts Used:
- 218755504
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- hector from los fresnos, TX
- Parts Used:
- 297309000
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
When I was ready to instal fan motor, I noticed that there was no thread where I was supposed to screw in the bolts
When i found out there was no thread in brace where bolts were supposed to screw in, I panicked. I thought I would have to send part back or go to a machine shop to make a thread. I called a friend for help and he told me the bolts would make the thread if I just screwed them in. Sure enough, the bolts made the thread and then I just proceeded to instal motor and put refrigerator back together. It was simple.
Was this instruction helpful to you?
Thank you for voting!