Models > FRS6LF7JW6 > Instructions

FRS6LF7JW6 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the FRS6LF7JW6
121 - 135 of 911
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Beverly from PHILADELPHIA, PA
Parts Used:
240350649
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
I took the shelf out to wash it and it broke in a million pieces
I ordered a new shelf and I put in, less than minute
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
B J from Dillingham, AK
Parts Used:
5303918214
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Frost build up on evaporator
Remove the bottom freezer drawer. Remove back metal evaporator panel. Wire in new defrost terminationT-stat. Reassemble evap panel. Good to go.
12 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
don from St Augustine, FL
Parts Used:
WF2CB, 240323002
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the door bin broke
We considered tape and glue, but we knew that it would look like crap and wouldn't last. Fortunately the bin had a part number on it, so it was easy to order the correct part and it fit perfectly.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from Anchorage, AK
Parts Used:
240356402, 240323002
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 door bins got broken
I ordered the parts by studying the diagram and they were perfect. Thanks for making it so easy.
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Melissa from Huntersville, NC
Parts Used:
240356402
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
I dropped and cracked the door bin
2 steps; 1. I removed the broken door bin 2. I slid the new door bin in place, Am I a genius or what!
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Chippewa Falls, WI
Parts Used:
WF2CB, 240323002
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Need new bin and replace water filter
I replaced the items myself, there was not much to it. I must comment on the sight. It was very interactive and easy to use!
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bruce from Ocala, FL
Parts Used:
240334201
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
One arm on the plastic bin or tray cracked and broke.
This was a replacement part, a simple snap in. What really impressed me was the PartSelect web site and the ease of locating the part and making sure it was the right one. Finally, the price beat out all the others. Since this tray looked like others on the same unit, I needed the details, the different view angles and dimensions to make sure it was correct. No other web site was even close in ease of use or in providing such details. I know I won't waste my time at PartSelect and I've always gotten the right part at the best price.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gayle from Hot Springs Village, AR
Parts Used:
240350649
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
When washing the shelf insert glass piece, it broke into a million pieces.
The repair was just as easy as ordering the part which arrived on day three after I ordered it! I had already cleaned up the broken glass insert, so all I had to do was unpack and lay the new shelf in. Took less than a minute!
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ROMAN from COLTON, CA
Parts Used:
241993101, 241993001
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
chrisper drawer jammed found supports were broken
Looked at video on how to remove and reinstall support and followed the instruct ions
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ANGELA from MEBANE, NC
Parts Used:
316538904
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Refrigerator Light bulb went out
I replaced the bulb using my hands to twist the bulb in the socket located at the top of the refrigerator.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
TAYLOR from COLORADO SPRINGS, CO
Parts Used:
241682001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
My grandkids broke the water dispenser in the refrigerator door.
The repair was easy. It just required a little time and patience. There are about a half dozen screws to remove and three of them are very small. I woild suggest a phillips head screwdriver with a magnetic tip for the small screws. They can easly fall into the control unit and be hidden. If they happen to fall, a small pen-type magnet that is expandable will make it easy to retrieve. I used a small set of needle-nose pliers to replace the small metal plates over the plastic pins that hold the water actuator in place. If your are careful, this repair can be done without disconnecting any of the electrical wiring.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Douglas from Denver, IN
Parts Used:
242252702
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Water dripped from water outlet on door
Replaced the Triple Water Valve
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Levi from Ambler, PA
Parts Used:
240396002
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
No Water or Ice Dispensing
First I obtained the manual to the refrigerator. I identified the screws to be removed. I turned off the water then unplugged the water lines. I then replaced the Water Filter Base and reassemble the parts. Within minutes of turning on the water, water and ice making had returned. I was a hero for saving the family $200 in parts and labor.
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RANDY from NORTH CHARLESTON, SC
Parts Used:
241993101
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Support stude for both vegetable crispers broken off
Support studs have an expansion fitting - center post has to be pushed through to allow expansion joint to collapse for removal. After installation, this post can be pushed in or pulled out to secure the stud and be the proper length to hold the bins.

None of this was obvious - an online tip from another member was invaluable.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diane from NORMAN, OK
Parts Used:
241657602, WF2CB
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Part select went wrong product
Plug in numbers to website

Buy parts

Get parts

Parts don’t fit

Spend hours trying to get correct part from partselect.com

Still don’t have part

Still don’t have freezer shelf
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FRS6LF7JW6
121 - 135 of 911