Models > FRT20GRCD0 > Parts

FRT20GRCD0 Frigidaire Refrigerator - Parts

Jump to:

1 - 12 of 175
Keep searches simple, eg. "belt" or "pump".
This 120 volt, 60 hertz defrost timer is used to switch the refrigerator into a 30 minute defrost cycle after eight hours of compressor run time. The cycle allows the heater to clear frost from the ev...
In Stock
Order now and your part arrives by Nov 21
$21.95
This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM...
In Stock
Order now and your part arrives by Nov 21
Steady compressor operation relies on the electrical support provided by this refrigerator run capacitor. To help the compressor run as designed while circulating refrigerant through the cooling syste...
In Stock
Order now and your part arrives by Nov 21
During automatic defrosting, this refrigerator thermostat permits heater operation while the evaporator coils are cold, then breaks the circuit at the cutoff temperature to help prevent overheating. I...
In Stock
Order now and your part arrives by Nov 21
This is the replacement crisper drawer cover support for your refrigerator. The crisper shelf rests on the support, which keeps it level. If your drawer cover or shelf will not stay level, or will not...
No Longer Available
To drive the fan that circulates cold air through the refrigerator and freezer compartments, this evaporator fan motor uses a center hub mount and rotates clockwise. The shaft measures 1/8 inch in dia...
In Stock
Order now and your part arrives by Nov 21
Interior lighting depends on a secure connection between the bulb and its power supply. This refrigerator light socket holds the bulb in place and provides the electrical contacts needed to illuminate...
In Stock
Order now and your part arrives by Nov 21
This rack may be longer than what is needed. You will need to cut this rack to make it fit your appliance.
In Stock
Order now and your part arrives by Nov 21
Sold individually.
In Stock
Order now and your part arrives by Nov 21
This plastic ice cube tray is used to hold water for freezing into 12 cubes at a time. Channels help water spread evenly during filling, while corner supports allow trays to stack securely in the free...
In Stock
Order now and your part arrives by Nov 21
No Longer Available
1 - 12 of 175