F45PR22CD0 Frigidaire Refrigerator - Instructions

Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE

At approximately 1 a.m. last Monday, I tried to be the "good wife" and make some Crystal Light for my diabetic husband, who had gone to bed early as he was not feeling well. As I went to place the pitcher in the frig, I knocked over another pitcher of red juice and a bowl of fruit, also with red juice, spilling it all over the floor. Cleaned it up, but still noticed red juice under the trim of the glass crisper shelf. Decided to take the shelf out and wash it in the sink which required taking out the crisper drawer...which required moving all the stuff off that glass shelf too When I did so, I put 2 cans of tea on the counter and accidently hit a can with the shelf; knocked the can off and it hit just right to start spewing iced tea all over the floor in addition to the red juice I had just cleaned up! In my effort to compensate for hitting the can, I struck the shelf on the edge of the sink, shattering the glass into a bazillion pieces! It was made of safety glass, fortunately, but not wanting to take any chances, decided to wet mop the floor after sweeping up the glass and removing the thousands of pieces from the dual sinks. By the time I got all of this done, it was nearly 4 a.m.! I got online, found this website and was able to locate the proper parts with the help of the excellent staff available online and by phone. I ordered the shelf, along with 3 other pieces I thought I might need; the box came in 2 days! I fixed the refrigerator in less than 15 minutes, which included opening and disposing of the box and sent back two pieces of trim I discovered I did not need. I also got a replacement drawer for the bottom shelf which had been broken for a couple of years. The staff helped me with the returns, and not only have I returned them, I have already received notification and credit to my account! These folks are excellent! Thanks for helping this poor old woman in distress, and I hope the staff, and all of you reading this, have a very Merry CHRISTmas and a wonderful 2010! ?

Got the new drawers, removed the drawer fronts from the old drawers, slid the fronts onto the new drawers and installed them. Why did we wait years to fix this simple problem?

I'm a widow and thought I'd need my son's help to fix this. I did not. I pulled out & emptied the broken lower drawer, tapped the plastic cover off against the countertop, washed the plastic cover, snapped it into the new drawer, filled it & put it into the fridge. 7 Minutes, tops - most of that time spent emptying the old drawer. I can't believe I waited as long as I did to fix this drawer; it was ridiculously easy.

First of all, I both called and e-mailed PartSelect, to praise them for my overall experience. It's a 17+ year-old refrigerator, they had the parts in stock, I ordered them, and received them the next day; less than 24 hours later. WOW! The install was a bit tricky, just trying to get the old drawer fronts removed, to put onto the new drawers. I was careful to not manhandle them too much, so as not to break them. They were just kind of gunked up with debris, from the many years of use. I used the screwdriver blade to gently pry the drawer front loose, from the old drawer. Once loose, the reinstall was really quite simple. Thanx!

We ordered the wrong parts, thinking front storage includes the drawers also. But when we received the shipment we found just the front storage pan. I called up Partselect.com and explained what I needed, they were very helpful and took the correct part order and refunded my old order. The shipment of drawers came in after 3 days and we installed them with our old front storage pans in less than fifteen minutes. There service was wonderful and they were prompt and professional.

replaced it

removed the drawer, pried off the glass front, slid the glass front into the new drawer, and returned the drawer to its place in the referigerator.

The schematic drawings on the PartSelect website were really helpful.

Got the new one and took the face plate off the old and sliped it right on to the new one. I noticed that the guide edges on the new Drawer are made better. That is added bennie.

Thank you so much

First we took the the old drawer out and pride off the front clear covering on both sides. Then we placed the front covering on the new drawer and fit it in place. This had to be done twice since it did not take the first time. It had come loose after a couple of days and we snaped it back into place. It has done fine since.

I received the drawer within 2 days of ordering it online, which was extraordinary. I removed the front of the old drawer, as instructed and placed it on the new drawer. I then replaced the drawer in the refrigerator and the job was complete. The entire experience from beginning to end was simple and completed in very little time. Had I known it would be this easy, I would have ordered the drawer sooner.

I didn't know the front of the drawer could come off so it was pretty gunked up with dried meat juices that had leaked. The fit was very tight. I had to really work the putty knife to get it between the front and the drawer at the bottom where the catch is. I was afraid I would break or chip the front before I got it off but it handled the pressure pretty well. Had to use some force though. Once I cleaned the front it slid right down and snapped into place.

Use small srew driver to take door off and put back on just like the video you supplied on line.

We removed the front of the drawer from the old drawer and reinstalled on replacement drawer. It only took about 5 min. to complete. Shipping was Prompt. The person that helped to establish the Part no. was very helpful.

take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .