MRS22HRAD2 Frigidaire Refrigerator - Instructions

I removed the old drawer. Next I popped off the drawer front and threw away the rest. The drawer front then snapped neatly onto the new storage drawer. I then slid the newly assembled drawer into place.

I'm a widow and thought I'd need my son's help to fix this. I did not. I pulled out & emptied the broken lower drawer, tapped the plastic cover off against the countertop, washed the plastic cover, snapped it into the new drawer, filled it & put it into the fridge. 7 Minutes, tops - most of that time spent emptying the old drawer. I can't believe I waited as long as I did to fix this drawer; it was ridiculously easy.

First of all, I both called and e-mailed PartSelect, to praise them for my overall experience. It's a 17+ year-old refrigerator, they had the parts in stock, I ordered them, and received them the next day; less than 24 hours later. WOW! The install was a bit tricky, just trying to get the old drawer fronts removed, to put onto the new drawers. I was careful to not manhandle them too much, so as not to break them. They were just kind of gunked up with debris, from the many years of use. I used the screwdriver blade to gently pry the drawer front loose, from the old drawer. Once loose, the reinstall was really quite simple. Thanx!

I simply removed 4 screws holding the casing and then 2 more holding the timer. It was very easy. I then replaced the timer by unplugging and plugged the new one in. I replaced all the screws and the job was done. Less than 30 minutes. I was very impressed with the shipping time. When I ordered the part, I had it the next day.

Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.

Inserted the caps into the bar and snapped in door. That's it.
No tools needed! Hope it last another 20 years

replaced it

First we took the the old drawer out and pride off the front clear covering on both sides. Then we placed the front covering on the new drawer and fit it in place. This had to be done twice since it did not take the first time. It had come loose after a couple of days and we snaped it back into place. It has done fine since.

I received the drawer within 2 days of ordering it online, which was extraordinary. I removed the front of the old drawer, as instructed and placed it on the new drawer. I then replaced the drawer in the refrigerator and the job was complete. The entire experience from beginning to end was simple and completed in very little time. Had I known it would be this easy, I would have ordered the drawer sooner.

I didn't know the front of the drawer could come off so it was pretty gunked up with dried meat juices that had leaked. The fit was very tight. I had to really work the putty knife to get it between the front and the drawer at the bottom where the catch is. I was afraid I would break or chip the front before I got it off but it handled the pressure pretty well. Had to use some force though. Once I cleaned the front it slid right down and snapped into place.

Use small srew driver to take door off and put back on just like the video you supplied on line.

We removed the front of the drawer from the old drawer and reinstalled on replacement drawer. It only took about 5 min. to complete. Shipping was Prompt. The person that helped to establish the Part no. was very helpful.

took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.

removed the drawer, pried off the glass front, slid the glass front into the new drawer, and returned the drawer to its place in the referigerator.

The schematic drawings on the PartSelect website were really helpful.

Got the new one and took the face plate off the old and sliped it right on to the new one. I noticed that the guide edges on the new Drawer are made better. That is added bennie.

Thank you so much