FRS22PRCD0 Frigidaire Refrigerator - Instructions

I was able to make the repair in very little time, took longer to empty the refrigerator and remove the broken pieces than it did to install the new ones. I originally ordered some incorrect items and was amazed at the quickness of receiving the correct pieces --- I have already recommended you to several friends and will definitely use you again should the need arise.

I used a small screwdriver to pry the tabs of the front glass panel loose, and then slid it upward and out of the broken storage drawer. Then I slid the panel into the front slots of the new drawer and pushed in an evenly downward manner until it snapped in place. It was an easy task and now we have a new drawer that slides smoothly.

Found the part on this site ordered and received part in 3 days. Took approx. 10 min to replace. Thanks for the quick service.

We took the door off and replaced the pastic washer. Found out that the repair people never informed us that the door itself has a bit damaged so this repair would have to be done over and over. Nice way for them to make money off us.
We were able to fix it so that it will last a LONG time. Sometimes it realy can pay to do-it-yourself!

Removed old pan and cleaned all surfaces and reinstalled new pan.

A little research told me the hum plus no cooling was either the compressor or the relay. I ordered the new relay and put it in but it didn't fix the problem. I ended up having to buy a new fridge, but it was worth the $30 gamble to see if I could fix it on the cheap and it saved me the money a service call would've cost. Pretty easy installation, just in a tight space on my model.

Unplugged fridge, opened the door, used flat head screwdriver to pop off old switch, unplugged wires, plugged in new switch, popped it back in, and plugged the fridge back in. 2 minute fix.

Dear Part-select,
I had a fridge that was not working food was melting in the freezer, Beer was warm. You get the picture anyway using your site I found the parts needed to to fix the issue in fact I ordered two parts one fixed the issue 50% and the other like 30% of the time! both parts with overnight shipping were cheaper than 1 part if purchased at our local appliance part outlet:) not to mention the cost of a repair person. Thanks again! . Keep up the good work


Tom Houck
Spokane, WA
Houck Photo
509-723-3418
tomhouck1@comcast.net

Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.

Took the front panel off the old drawer and put it on the new drawer.

couldn't have been easier, even an old lady (like me) can do it with no problem.

At approximately 1 a.m. last Monday, I tried to be the "good wife" and make some Crystal Light for my diabetic husband, who had gone to bed early as he was not feeling well. As I went to place the pitcher in the frig, I knocked over another pitcher of red juice and a bowl of fruit, also with red juice, spilling it all over the floor. Cleaned it up, but still noticed red juice under the trim of the glass crisper shelf. Decided to take the shelf out and wash it in the sink which required taking out the crisper drawer...which required moving all the stuff off that glass shelf too When I did so, I put 2 cans of tea on the counter and accidently hit a can with the shelf; knocked the can off and it hit just right to start spewing iced tea all over the floor in addition to the red juice I had just cleaned up! In my effort to compensate for hitting the can, I struck the shelf on the edge of the sink, shattering the glass into a bazillion pieces! It was made of safety glass, fortunately, but not wanting to take any chances, decided to wet mop the floor after sweeping up the glass and removing the thousands of pieces from the dual sinks. By the time I got all of this done, it was nearly 4 a.m.! I got online, found this website and was able to locate the proper parts with the help of the excellent staff available online and by phone. I ordered the shelf, along with 3 other pieces I thought I might need; the box came in 2 days! I fixed the refrigerator in less than 15 minutes, which included opening and disposing of the box and sent back two pieces of trim I discovered I did not need. I also got a replacement drawer for the bottom shelf which had been broken for a couple of years. The staff helped me with the returns, and not only have I returned them, I have already received notification and credit to my account! These folks are excellent! Thanks for helping this poor old woman in distress, and I hope the staff, and all of you reading this, have a very Merry CHRISTmas and a wonderful 2010! ?

I removed the old drawer. Next I popped off the drawer front and threw away the rest. The drawer front then snapped neatly onto the new storage drawer. I then slid the newly assembled drawer into place.

Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE

First of all, I both called and e-mailed PartSelect, to praise them for my overall experience. It's a 17+ year-old refrigerator, they had the parts in stock, I ordered them, and received them the next day; less than 24 hours later. WOW! The install was a bit tricky, just trying to get the old drawer fronts removed, to put onto the new drawers. I was careful to not manhandle them too much, so as not to break them. They were just kind of gunked up with debris, from the many years of use. I used the screwdriver blade to gently pry the drawer front loose, from the old drawer. Once loose, the reinstall was really quite simple. Thanx!

Got the new drawers, removed the drawer fronts from the old drawers, slid the fronts onto the new drawers and installed them. Why did we wait years to fix this simple problem?