F45PC22BW0 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Anna, IL
- Parts Used:
- 5303289501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken slide rail on lower storage drawer
Pulled out the drawer and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Wesley Chapel, FL
- Parts Used:
- 5303289500
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken drawer
I removed old drawer, removed face plate, installed faceplate on new drawer. Test OK.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dorothy from Midlothian, TX
- Parts Used:
- 5304411659, 5303289501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken bottom drawer
snapped together, very easy
Also the ORDERING process was very easy.
I had tried for 3 days with another supplier who would give me one word answers.
Part Select was extremely helpful, and delivery took 3 days.
Also the ORDERING process was very easy.
I had tried for 3 days with another supplier who would give me one word answers.
Part Select was extremely helpful, and delivery took 3 days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- M from Louisville, KY
- Parts Used:
- 5303289500
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken track on upper storage drawer
No tools required! Easy as falling off a log! Drawer face snaps off and reinstalls on new drawer body; slide it in track and you're good to go.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LUIS from CENTENNIAL, CO
- Parts Used:
- 215846602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Freezer built ice, fridge not cold enough and running constantly.
Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- NATHANIEL from PEARLAND, TX
- Parts Used:
- 5303289500
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Top Edges Broke
Use small srew driver to take door off and put back on just like the video you supplied on line.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eugene from Hollywood, MD
- Parts Used:
- 5303289501
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drawer slide broke,needed new drawer
I took my time to remove the front off of the old drawer,by gently prying it apart with two screwdrivers, this was the hardest part, the front installed very easily . The shippiong time was 2 days instead of three. Will use partselect again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joachim from Marengo, AL
- Parts Used:
- 5303289501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
refr. shelf had been damaged and glueing would not work permanently
Just snap the ordered part to the undamaged front part together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lee Ann from Houston, TX
- Parts Used:
- 5303289500
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken drawer
removed the drawer, pried off the glass front, slid the glass front into the new drawer, and returned the drawer to its place in the referigerator.
The schematic drawings on the PartSelect website were really helpful.
The schematic drawings on the PartSelect website were really helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Williamstown, NJ
- Parts Used:
- 5303289501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The Drawer was broken on the guide edge.
Got the new one and took the face plate off the old and sliped it right on to the new one. I noticed that the guide edges on the new Drawer are made better. That is added bennie.
Thank you so much
Thank you so much
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- LK from LAWRENCE, KS
- Parts Used:
- 5303289501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken rail inserts that hold the drawer up and in place
Moved glass front from broken drawer and placed on new drawer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeff from Willoughby, OH
- Parts Used:
- 5303289500
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Broken storage drawer
First I removed the old drawer front. When put the old front onto the new drawer I noticed that the two little rubber plugs had nowhere to push into as the holes were not drilled out. I got my portable drill and drilled out the holes, then I slid the drawer front into place snapped it in and pushed in the plugs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Moulton, TX
- Parts Used:
- 5303289320, 215314301
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Socket set
Left bottom part of door rusting out
took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- brad from minneapolis, MN
- Parts Used:
- 5303917954, 215846602
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Freezer okay, but fridge was warm
Website was great!
The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.
To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
The defrost timer was right in front. 2 minutes and a screwdriver and I had it replaced.
To replace the thermostat, I had to take out the back panel, defrost it and then install the new part. the only problem was that the heatshrink tubing they sent was too large. Otherwise, it worked great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Stuart, FL
- Parts Used:
- 215846602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
coil Iceing up
took 4 screws out of the discharge vent on top of the refrigerator section and unpluged the wiring harness and put the section on the counter and unscrewed the timer and put the new one in and reinstalled the assembly and plugged the Jack and put the 4 screws back in, and rotated the timer and put it on defrost removed the back and check the heaters and drain .
Was this instruction helpful to you?
Thank you for voting!