GRSS2652AF1 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Avrum from Boynton Beach, FL
- Parts Used:
- 241786014
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
Had frost in freezer of side by side. Did dollar bill test and determined that gasket was not sealed.
Consulted You Tube. Took off old gasket. Easy. Put on new one after getting it warm. The track on the new gasket did not sit properly. Took multiple attempts but finally worked. Size was perfect but the gasket color was different than original and therefore, different from the refrigerator door. No tools required.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lewis from JONESBORO, GA
- Parts Used:
- EPTWFU01
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Was time to replace my water filter
Twist to remove the old one an twist to install the new 9ne
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paula from PITTSBURGH, PA
- Parts Used:
- 241786013
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My old seal was torn
I looked at the internet before I purchased a new seal and saw how to repair it. It was a matter of pulling out the old seal and just popping in the new. The internet said to use a hair dryer to melt the rubber to adhere to the fridge in places where it wasn't. It was quick!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dianne from COLLIERVILLE, TN
- Parts Used:
- 5304526920
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
one roller glide on deli cover broke off .... the new deli cover had 2 new glides!!
This barely qualifies as an installation. I simply lifted and pulled the old Deli cover out and placed the new one in place and snapped it down! I didn't need to use even ONE screw!
The easiest replacement ever!
The easiest replacement ever!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from FONDA, NY
- Parts Used:
- 241547902
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
No light in fridge
I first ordered the wrong switch I called and got a return label and was refunded my money before even shipping the wrong switch I was helped for the right switch and it arrived in 5 days the replacement works perfectly very easy to install. Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BO from SUN CITY WEST, AZ
- Parts Used:
- EPTWFU01
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
No problem - just replace every 6 months!
Just place new filter and lock it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joy from lacey's spring, AL
- Parts Used:
- 241786014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
I was getting thick frost buildup in the upper right corner and my water line was freezing
The repair instructions were suspiciously easy sounding- but in actuality- right on! I am not a DIY-er , but I did it! The old gasket came off fairly easily and the new one went right on! No tools needed! There wasn’t an immediate ‘suction/seal’ when I closed the door, but Grok said that was normal, it may take a little time… Sure enough- in the morning it was tight! That’s been 2 weeks and so far- so good!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from FREE SOIL, MI
- Parts Used:
- 243297613
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Original ice maker not working leaking water water out door
Removed exterior housing, sliding old unit forward to release. New unit went in easily. Caution wires don't get pinched.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marcie from Tampa, FL
- Parts Used:
- 241786014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Gasket replacement
The gaskets aren’t really attached, they are just wedged into a small notch the goes around the entire door. So you can just pull the old one off with no tool. The new one arrived looking very bent and twisted but if you heat it with a hair dryer it goes back to its shape. When installing…You start in the corner and work your way around with a butter knife and hair dryer and it eventually sits into the notch. We watched a video on YouTube, it was easy to find a video and easy to do with two people and no tools or experience. Takes a few days for the gasket to feel fully settled into the notch
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HARRY from S SAN FRAN, CA
- Parts Used:
- 241786014
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Freezer door seal shrunken,icing up,constant running
Pulled door seal put and pushed in new seal, icing formed on fridge side lower return vents, had to fully chip away, compressor running and stopping as normal.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from henrico, VA
- Parts Used:
- 241639502
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Socket set
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from LEHIGH ACRES, FL
- Parts Used:
- 218755504
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Was this instruction helpful to you?
Thank you for voting!
Water filter a bit stubborn but resolved. Other questions ~ see below
When reading instructions, I noticed it said to run water through the water filter. I don’t have a water dispenser ~ I only occasionally make ice. So how often should I change, Barely used. The red light will go on, can I just ignore it?
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katie from Hartville, MO
- Parts Used:
- 241761301
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Moved it from FL to MO left bracket-upper hinge in FL
Used socket set and screw drivers to attach ordered hinge, thankfully we had the screws just not the hinge. Wonderful to be able to find and order on line! Thanks so much!!!
Was this instruction helpful to you?
Thank you for voting!
old seals on both fridge doors
pulled the old seals off one at a time and starting from the top of each door, pressed the top edge of the seal into the groove, using the quik clamps to hold the top in palce at each top corner, went down each side of the door and pressed the seal into the groove, when I reached the bottom, I moved the clamps to the bottom and used thm to help press the seal into the bottom groove, Each door took about 15 min.
Was this instruction helpful to you?
Thank you for voting!