Models > FRT22THAB1 > Parts

FRT22THAB1 Frigidaire Refrigerator - Parts

Jump to:

1 - 12 of 252
Keep searches simple, eg. "belt" or "pump".
This 120 volt, 60 hertz defrost timer is used to switch the refrigerator into a 30 minute defrost cycle after eight hours of compressor run time. The cycle allows the heater to clear frost from the ev...
In Stock
Order now and your part arrives by Nov 21
This is a genuine OEM ice maker assembly for your refrigerator. The ice maker makes eight cubes at a time, by filling the mold with water from the inlet valve, freezing the water until the cubes are f...
In Stock
Order now and your part arrives by Nov 21
$21.95
This 40-watt light bulb has a standard screw-in base and is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM...
In Stock
Order now and your part arrives by Nov 21
To control the flow of household water into the ice maker or water dispenser, this refrigerator water inlet valve opens when water is needed and closes to stop the flow. Check for a worn or damaged va...
In Stock
Order now and your part arrives by Nov 21
Steady compressor operation relies on the electrical support provided by this refrigerator run capacitor. To help the compressor run as designed while circulating refrigerant through the cooling syste...
In Stock
Order now and your part arrives by Nov 21
Fresh ice is produced automatically by this refrigerator ice maker assembly, which fills its mold, freezes water, and releases cubes into the storage bin. Its heat release mechanism briefly warms the ...
In Stock
Order now and your part arrives by Nov 21
During automatic defrosting, this refrigerator thermostat permits heater operation while the evaporator coils are cold, then breaks the circuit at the cutoff temperature to help prevent overheating. I...
In Stock
Order now and your part arrives by Nov 21
This is the replacement crisper drawer cover support for your refrigerator. The crisper shelf rests on the support, which keeps it level. If your drawer cover or shelf will not stay level, or will not...
No Longer Available
This refrigerator door shelf retainer bar end cap is designed to secure and support the door rack bars that hold bottles, jars, and other items in place. It snaps easily into the door liner, keeping t...
In Stock
Order now and your part arrives by Nov 21
To drive the fan that circulates cold air through the refrigerator and freezer compartments, this evaporator fan motor uses a center hub mount and rotates clockwise. The shaft measures 1/8 inch in dia...
In Stock
Order now and your part arrives by Nov 21
Interior lighting depends on a secure connection between the bulb and its power supply. This refrigerator light socket holds the bulb in place and provides the electrical contacts needed to illuminate...
In Stock
Order now and your part arrives by Nov 21
This rack may be longer than what is needed. You will need to cut this rack to make it fit your appliance.
In Stock
Order now and your part arrives by Nov 21
1 - 12 of 252