FPSC2277RFB Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from DUCK RIVER, TN
- Parts Used:
- 242252702
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Water line retainer missing in one port of new valve
carefully removed retainer from old valve
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ruth from vancouver, WA
- Parts Used:
- 242252702
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
ice maker not making ice
The part was easy to install and solved the problem! We had ice within hours. Thanks PartSelect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mayra from VALLEY STREAM, NY
- Parts Used:
- 240351061
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
BROKEN DRAW
Remove old one and put in the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from FREE SOIL, MI
- Parts Used:
- 243297613
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Original ice maker not working leaking water water out door
Removed exterior housing, sliding old unit forward to release. New unit went in easily. Caution wires don't get pinched.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daune from OCALA, FL
- Parts Used:
- 241675704
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Ice Maker was making ice erratically
After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.
So wasted $102. FYI the part took 6 days to arrive.
So wasted $102. FYI the part took 6 days to arrive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kelly from Comfort, TX
- Parts Used:
- 241993001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
shelf supports broke
just slid them in and gently taped the pegs in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Florence, CO
- Parts Used:
- 241993101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Drawers wouldnt open
Replaced wall pins pulling center pins removeing set new ones replaced drawers. Damm Kids Busted the old ones it was easy to find your web site , parts and purchasse items as this was a new one It was diffacullt to use drawers
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- harry from long beach, CA
- Parts Used:
- 240350903
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken cover
took out the glass popped out the cover and put the new one on and put the glass on. DONE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from jonesboro, GA
- Parts Used:
- 241993101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken tabs
The tabs were broken by kids it took 10 minutes to repair on all 4 tabs you have to remove the push pins completed to get the new tabs to fit right
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from FORT MOHAVE, AZ
- Parts Used:
- 241514601
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Left glide for center shelf broke on front corner so the shelf lost support.
Unscrewed bolts, removed broken part and replaced with new glide. The part was slightly longer than original so I had to pound it in a little which slightly bowed the new part, but it works.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from Camden, SC
- Parts Used:
- 241993101
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken shelf support stud
Use pliers to remove the broken support. Clear the remaining insert pieces with screwdriver/pliers and insert the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from ROGERS, AR
- Parts Used:
- 240350649
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
While washing the insert, I dropped and broke it.
Ordered the correct part according to the specifications; took the packing plastic off; and placed it on the crisper. Ta Ta!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- BO from SUN CITY WEST, AZ
- Parts Used:
- EPTWFU01
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
No problem - just replace every 6 months!
Just place new filter and lock it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from DENTON, TX
- Parts Used:
- 240350649
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broke glass shelf during cleaning
Simply installed new shelf. Was very pleased how easy it was to find the correct part on the website.
It took 3 hours to clean up the broken glass and 2 minutes to install the new one!
It took 3 hours to clean up the broken glass and 2 minutes to install the new one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Don from SAN MARCOS, CA
- Parts Used:
- 241514601
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Broken Drawer Guide
Unscrewed 2 nut screws, pulled off broken guide, replaced new guide in position, screwed in the 2 nut screws. Slide in the basket. Done.
Was this instruction helpful to you?
Thank you for voting!