All Installation Instructions for Frigidaire Refrigerator FPBC2278UF1

Customer:: Michael from CINCINNATI, OH
Parts Used:: PAULTRA2, EPTWFU01
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Refrigerator alerted me to change the filters

Took out old filters, put in new filters

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lindsay from HUNTINGTN BCH, CA
Parts Used:: 242071301
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Door shelf broke

Snapped the new shelf in.

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marcus M from MONROE TWP, NJ
Parts Used:: 5304508761, 5304508016
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

cover was cracker.

THE repair very easy.

4 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: ELIZABETH from HENRICO, VA
Parts Used:: 242010901
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Wrong Part sent!!!!!

I did not do a repair. You sent the wrong part & I didn't open the package but I can't get hold of anyone to return the part and get the correct part.

I am very upset that no one will help me. I paid $ 37.28 for the part I ordered and then the wrong part was sent

The sku # on the package is 242010901.This is a roller type part and I ordered a small wheel.
I can't even find a return address to send it to.. Please help me
Elizabeth Romage
libbieinrichmond@comcast.net
8042627963

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Timothy from West Henrietta, NY
Parts Used:: 5304508761, 218755402
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

broken part where the wheel connects to the glass to one of the shelves,

had to take off wheels to the old glass frame and put it on the new frame,

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: TIM from W HENRIETTA, NY
Parts Used:: 5304508761
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

the frame that holds the wheels broke off to the food drawer

had to take off a few pieces to the old frame and put it on the new one that held the drawer on the support bracket so it would be put back in the refrigerator.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joshua from AKRON, OH
Parts Used:: 809069206
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

condenser fan is no longer holding running speed

Removed the baskets/containers from freezer compartment. Removed back panel from the freezer interior.
Swapped the fan on the mount
Tested and reassembled fully
Back in working order

Full steps followed
https://www.youtube.com/watch?v=73rubWwQork

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Billy from FAYETTEVILLE, NC
Parts Used:: 5304537408
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

Torn Freezer Drawer Gasket

Remove the freezer drawer by unscrewing the two 12mm screws on both sides of the drawer.
Lift the drawer up out of the slots the frame and away.
Lay the drawer on a padded surface to protect the drawer cover finish.
Pull the old gasket out of the drawer and discard.
Position the new gasket around the edge of the drawer. Starting at one corner press the gasket into the slot in the drawer edge. Continue working the gasket until you return to the starting point.
Inspect the gasket to ensure it is seated in the slot completely.
Return the drawer to the refrigerator, placing the lugs on the drawer into the slots of the frame and insert the screws to their original position and tighten securely.
Inspect the drawer for proper level/sealing in the freezer drawer position. Adjust as necessary.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Albert from SAN ANTONIO, TX
Parts Used:: 243297613
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Screw drivers, Socket set

There is no power, due to the COVID-19 pandemic there no Tech support available,

My repair plan is to continue buying parts for it until is starts working. I notices a large rusty stain on the back of the refrigerator, so I replaced the Ice Maker. Then, I replaced the Evaporator Motor. Yet nothing will come on.
I called Conn's Home Plus where I bought the Frigidaire Refigerator back in February 2014. The Tech said that It needs a Board-main Power (computer part). So I it ordered from PartSelect. It is due here by July 20, 2020. The Parts and Tech cost is now over Five Hundred ($500) dollars.
HELP!! I need INSTRUCTIONS, HELP!!!
Albert F. Alfaro in San Antonio, TX.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dennis from Oley, PA
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Thin, flexible edge on outermost door gasket was tearing from the main gasket, likely due to being rubbed when accessing refrigerator..

Gasket is held in place by an extrusion on the back side. Simply remove the old gasket and press the new gasket's extrusion into the track on the door.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Karl from Brookfield, CT
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Refrigerator wasn't staying cool enough

Easily removed the old gasket and put the new ones on exactly the same way the old ones came off but in reverse

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jack from TAMPA, FL
Parts Used:: 809089801, 5304501181, 5304501179
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The trim on the water/ice dispenser was scratched and stained.

Went to website, ordered the parts. Watched the YouTube video by Partselect. Took the old trim peices off, cleaned up the opening, installed new parts. Refrigerator looks like new again. Super easy. Just used a screwdriver.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Andres from Golden Valley, MN
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replaced door gaskets with new ones

Removed the old door gaskets by hand and attached the new ones by inserting the edges in the existing grooves

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Daniel from Hampton, NH
Parts Used:: 5304537408
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours

Previous seal had a tear and cold air was leaking around seal

Pulled the old seal out of the groove. Placed new seal in the groove. New seal has to be heated and massaged to get it into proper form so it does not leak. I have been continuously heating and massaging to get the seal to get it in the proper form. Been working on it for a week. Almost there.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dennis from Lancaster, SC
Parts Used:: 241778315
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

GASKET WORN AND LEAKING

SIMPLY REMOVE THE OLD GASKET PULLING LIGHTLY BY HAND
THEN PUSHING THE NEW GASKET BY HAND

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

FPBC2278UF1 Frigidaire Refrigerator - Instructions