FGSC2335TDA Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Virgel from NEWNAN, GA
- Parts Used:
- 240350603
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
glass shelf was broken.
Well, after watching the video before ordering the part, I ordered the correct part. My wife had ordered the wrong part that I had to return and ordered the correct one. To install the glass you just take out the crisper above shelf and lay the glass in place. So simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jessica from Sugar Land, TX
- Parts Used:
- 240350649
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Refrigerator glass shelf replacement
The previous tenants broke the glass shelf in the refrigerator and all I did was order the part and place it on the refrigerator shelf. Very simple and I ordered the correct part thanks to the refrigerator diagram the website had.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from DENTON, TX
- Parts Used:
- 240350649
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broke glass shelf during cleaning
Simply installed new shelf. Was very pleased how easy it was to find the correct part on the website.
It took 3 hours to clean up the broken glass and 2 minutes to install the new one!
It took 3 hours to clean up the broken glass and 2 minutes to install the new one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lynn from NESCOPECK, PA
- Parts Used:
- 240351061
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cracked crisper
Pulled out the old-put in the new.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper drawer cover and support
Removed broken parts and installed new ones. Only had a little problem getting supports out. I think they had sticky stuff from spills in the refrigerator that made it more difficult.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from bellmawr, NJ
- Parts Used:
- 241993001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken support
had to remove broken by pushing 1pin then remove.
put new one in reset pin done.
put new one in reset pin done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from Fort Wayne, IN
- Parts Used:
- 241993001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken crisper supports
The video was very helpfull. They were fixing the same refrigerator that I have. I punched in the set pin on the old part. Removed the old part by prying it out with a putty knife. Inserted the new part and drove in the set pin. I was glad that PartSelect had my parts. The repair shop in Fort Wayne Indiana did not even show this repair part on their computer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alvin from Barbourville, KY
- Parts Used:
- 242252702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
left out in the cold an froze
remove the old one and replace with the new one and yes it was that easy. All of the lines and wiring connectors were color coded
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from BRAINTREE, VT
- Parts Used:
- 218755402
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
A set scew was ordered twice.
The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Pittsburg, PA
- Parts Used:
- 242252702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set, Wrench set
Leaking Water Vlave
Just follow the instruction that come with the valve. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rebecca from Sapulpa, OK
- Parts Used:
- 242252702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
Water began to leak from valve
We followed the online instructions and tah-dah it was working...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Jensen Beach, FL
- Parts Used:
- 241993101
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Water dispenser dripping causing corrosion below tray
Replacement of the water valve repair was a snap. Only the main supply line needed to use a nut to secure the water supply. All other lines were simply cut below the pointed end of the plastic tubing line, nylon nut discarded and simply pushed in to seat with a O-ring fitting. Took no more than 10 minutes to install the new valve and test for leaks after turning water back on. This was the easiest appliance repair I have done in > 5 years, 100% success first time,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from CYPRESS, TX
- Parts Used:
- 240599301
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked frame
Found model
Checked website for part availability
Ordered
Tracked package
Received
Removed old
Placed glass in frame
Placed on rack in fridge
Replaced crisper !!
Checked website for part availability
Ordered
Tracked package
Received
Removed old
Placed glass in frame
Placed on rack in fridge
Replaced crisper !!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from BIG SKY, MT
- Parts Used:
- 240599301
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I broke one of the support wheels out of its seat. It supports the left crisper.
Tried JB Weld, not sufficient.
Got online, looked at the parts fiche for my model, chose the crisper top frame. Wrong part. Sent it back (shipping as $60 on a $125 part).
Ordered the part that the wheel appears to be screwed into (described as crisper support frame. Ordered new $11 plastic wheel as well.
Wrong part. It appears that the crisper drawers on my unit are supported by a monolithic piece (solid plastic) that includes the frame as well as the locators for the wheels. I could send pictures, but have decided to abandon fixing it. (I tossed the metal support that was the second order into the trash ($60 part)....
Got online, looked at the parts fiche for my model, chose the crisper top frame. Wrong part. Sent it back (shipping as $60 on a $125 part).
Ordered the part that the wheel appears to be screwed into (described as crisper support frame. Ordered new $11 plastic wheel as well.
Wrong part. It appears that the crisper drawers on my unit are supported by a monolithic piece (solid plastic) that includes the frame as well as the locators for the wheels. I could send pictures, but have decided to abandon fixing it. (I tossed the metal support that was the second order into the trash ($60 part)....
Was this instruction helpful to you?
Thank you for voting!