EI23CS35KS4A Frigidaire Refrigerator - Instructions

I have a lesson learned for those looking for the ice maker replacement part online. Originally I tried to look up the replacement ice maker by using the tool online that included my make, model and series. That ended with my receiving a part that had the water receptacle on the wrong side. I realized after this experience that if I took the ice maker out, then I could see a part number. When I entered the part number on the website, then immediately the correct replacement part came up. Regarding installation, it was a breeze, just loosen the screws and unplug the ice maker. To install, connect the ice maker, put it in place and then retighten the screws. Takes about 60 seconds IF you have the right part.

I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.

Water was leaking so I replaced the entire valve and just followed the color codes and thats it. Plug and play.

just placed onto

Very easy repair, instruction were clear and easy to follow

Simple, I had a repair man come over and diagnose the problem. After confirming, I ordered the part and replaced it. Need to make sure you get the ice build up out of the fitting tnat goes from the back of the fridge connection at the top and the filler tube inside the unit, mine was iced over. Repair man wanted to charge me $250.00... with his service call and buying the part, it cost $120

took existing water valve loose, removed plastic water lines and reinstalled on new valve and installed new valve into refrigerator

Simply laid the replacement shelf carefully in the space above the bin. Nothing much to the 'repair' but I do want to say that partselect will be my 'go to' any time I need appliance parts. I ordered my shelf late on Friday night and it was delivered to my home on Tuesday! Had I ordered during normal business hours on a regular weekday I wouldn't be surprised if it arrived the next day! That is incredible and exceptional service! Don't find that very often these days.

I had a repair man do the work.
That's always best.There was one day delivery on the part and the price was great. Thanks

I had to tap the screw holes with a 8/32 tap so that the screws would not bind.

turned off water supply, removed cardboard back, removed supply line, unhooked all color coded connections,took out bad water valve and replaced with new one note: the new valve came with pex connections so i carefully cut off flared tubing ends with sharp razor knife making sure when i pushed tubing into new valve that i did so with some force until i HEARD and felt them snap in place very simple plus i received the new valve in 2 days very happy with PartsSelect.com you CAN do it

Turned off water supply disconnected hose from valve removed cardboard backing removed the screws holding valve ass'y disconnected the three wire connections disconnected five hoses then cut and installed in new valve per instructions provided reconnected three wires reinstalled valve ass'y turned water supply back on and checked for leaks by engageing filtered drinking water in the refrigerator door replaced backing to complete job.

My repair was a simple as logging on to the "PartSelect.com" website - very easy to find the specific part I needed. The website makes the part selection a breeze.

remove back cardboard panel, cut off water supply, remove screws holding valve to back of refrigerator, unscrew water lines & reattach to same fittings on new valve, screw new valve in place, replace cardboard cover.

The new inlet valve came with pisco connectors so had to cut the end of the tubes off. Before doing this I marked all the tubes to make sure they were replaced in the correct order. The pisco connectors are great to use and very quick. The total install time was about 20 to 30 minutes. While you have the back of the frig off make sure you vaccuum the fan and coils. It was making ice in less than 20 minutes.