FRS22PRAD0 Frigidaire Refrigerator - Instructions

I removed the old drawer. Next I popped off the drawer front and threw away the rest. The drawer front then snapped neatly onto the new storage drawer. I then slid the newly assembled drawer into place.

I'm a widow and thought I'd need my son's help to fix this. I did not. I pulled out & emptied the broken lower drawer, tapped the plastic cover off against the countertop, washed the plastic cover, snapped it into the new drawer, filled it & put it into the fridge. 7 Minutes, tops - most of that time spent emptying the old drawer. I can't believe I waited as long as I did to fix this drawer; it was ridiculously easy.

First of all, I both called and e-mailed PartSelect, to praise them for my overall experience. It's a 17+ year-old refrigerator, they had the parts in stock, I ordered them, and received them the next day; less than 24 hours later. WOW! The install was a bit tricky, just trying to get the old drawer fronts removed, to put onto the new drawers. I was careful to not manhandle them too much, so as not to break them. They were just kind of gunked up with debris, from the many years of use. I used the screwdriver blade to gently pry the drawer front loose, from the old drawer. Once loose, the reinstall was really quite simple. Thanx!

We ordered the wrong parts, thinking front storage includes the drawers also. But when we received the shipment we found just the front storage pan. I called up Partselect.com and explained what I needed, they were very helpful and took the correct part order and refunded my old order. The shipment of drawers came in after 3 days and we installed them with our old front storage pans in less than fifteen minutes. There service was wonderful and they were prompt and professional.

replaced it

I didn't know the front of the drawer could come off so it was pretty gunked up with dried meat juices that had leaked. The fit was very tight. I had to really work the putty knife to get it between the front and the drawer at the bottom where the catch is. I was afraid I would break or chip the front before I got it off but it handled the pressure pretty well. Had to use some force though. Once I cleaned the front it slid right down and snapped into place.

Use small srew driver to take door off and put back on just like the video you supplied on line.

We removed the front of the drawer from the old drawer and reinstalled on replacement drawer. It only took about 5 min. to complete. Shipping was Prompt. The person that helped to establish the Part no. was very helpful.

took door off. sanded rusting hinge and greased. installed door hinge washer. I had to install a larger washer over hinge bearing to help support the door where it was rusting. no sweat. works like its new. thanks to you guys for having the parts.

Removed front low grill, removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the wires. Reversed process to install new timer.

easily put new draw together and installed in frig

No tools required! Easy as falling off a log! Drawer face snaps off and reinstalls on new drawer body; slide it in track and you're good to go.

I removed old drawer, removed face plate, installed faceplate on new drawer. Test OK.

Pulled out the drawer and replaced it with the new one.

I took my time to remove the front off of the old drawer,by gently prying it apart with two screwdrivers, this was the hardest part, the front installed very easily . The shippiong time was 2 days instead of three. Will use partselect again.