CRTE217AW0 Crosley Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- JAMES from FLETCHER, NC
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Refrigerator Door Shelf Bin was broken
I went online to the PART SELECT website and typed in the refrigerator model number. The website opened to a page that had a diagram of my refrigerator. I picked out the part I needed which gave me the part number. I typed it into the order page, paid for it online, and I received the part to my front door about four days after ordering it. It couldn't have been any easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yolanda from Lithia Springs, GA
- Parts Used:
- 240495804
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bought a used refrigerator with no bins in freezer door.
My entire experience with PartSelect.com has been excellent! My order was placed two days before I was scheduled to leave for vacation. My item was delivered and I was able to install it before I caught my flight! It was such a perfect fit that I forgot it was there when I returned a week later. You would never know the part didn't come with the original purchase! I will definitely use PartSelect.com again and highly recommend it to anyone missing parts on their appliances.
Was this instruction helpful to you?
Thank you for voting!
light socket overheated and crumbled
remove and replace socket. adjust light switch so that it turns light off when door closes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Janet from East Wenatchee, WA
- Parts Used:
- 215846602
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Coil, in freezer kept freezing up, refrigerator did not stay cold
Removed the timer, installed the new one. Great service from part select
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barb from Essexville, MI
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Someone had broken the the door shelf bin
I just had to order a part for the door. It just snapped on but ordering this part from you was a breeze!!! Easy to find part on your site and had it in a couple days!!! thanks for the great service! Barb N
Was this instruction helpful to you?
Thank you for voting!
We were missing the shelf retainers on the door
The parts guide on Parts Select was very accurate in showing which parts we needed. The parts were in stock, and they were priced the same as other websites. The most impressive part of the transaction is that they SHIPPED THE SAME DAY I ORDERED and they arrived the following day. That was with standard shipping! Everything was new and exactly as advertised. Parts Select made this a very easy transaction!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- ERIC from HYATTSVILLE, MD
- Parts Used:
- 240337901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken door shelf retainer
Removed shelf retainer from package it came in and slid the retainer down on tabs inside of door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Spring Hill, FL
- Parts Used:
- 5303918202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Evap coil was solid ice, fridge was 64 degrees.
Exactly as the video showed, except I had to take the evap coil cover off and use a hair dryer to thaw it out. It was still frosting up too much, so I ordered the thermostat as well. Both were really easy, once i saw the location of the defrost timer and the thermostat. Thanks for the great site, prices that put the big store to shame, and the good video too!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter F from Farmingville, NY
- Parts Used:
- 5303918549
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Refrigerator And Freezer Not Cooling Sufficiently
Refrigerator and freezer was not cooling sufficiently due to an inoperative evaporator cooling fan. Replacing the mini evaporator fan was extremely easy. Here are the steps needed to replace the fan. Step 1: Unplug refrigerator/freezer main power cord from the electric wall outlet. Step 2: Remove the food rack from the freezer compartment. Step 3: Using a 1/4" nut driver, remove the (2) 1/4" screws that hold the freezer vent panel/temperature control in place. Step 4: After removing the screws, disconnect the motor's wire harness connector which is located on the top left corner behind the freezer's vent panel/temperature control. Step 5: Pull away the entire vent panel/temperature control panel and lay it flat on a table. Step 6: Remove the vent cover from the main panel by holding the left side and the right side of the vent cover and squeeze both ends at the same time. Step 7: With the motor now being visible pull the motor's fan blade straight off. Step 8: Using the 1/4" nut driver, remove the (2) screws that hold the motor bracket to the rear of the main panel. Step 9: Using the 1/4" nut driver remove the (2) screws that hold the motor to the bracket and the (1) ground wire screw. Step 10: Install new motor back onto the bracket with the original (2) screws and the (1) ground wire screw onto the same locations.Step 11: Re install the (2) screws that mount the fan bracket to the back of the main vent panel.Step 12: Push the motor's original fan blade back on the shaft until it's fully seated. Step 12: Snap back in place the small vent panel back onto the main panel. Step 13: Push in place until you hear a click, the motor's wiring harness connector back onto the top left corner of the freezer's main power wire harness connector. Step 13: Push the main vent panel until it's in place and then reinstall with the original (2) 1/4" screws. Step 14: Reinstall the freezer's food rack back in place. Step 15: Plug in the main power cord into the wall outlet. Get ready to enjoy ice cold drinking water and a super cold freezer. Pete,your weekend mechanic
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Wareham, MA
- Parts Used:
- 240337901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken shelf
replaced broken shelf with new shelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alice from Charleston, SC
- Parts Used:
- 240337901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the door shelf broke
the new shelf just slide into place. It was very easy to get the part and put it in.
Was this instruction helpful to you?
Thank you for voting!
door shelf retainer had broken
I unpacked the materials and put them in place in the refrigerator. It was simple so no instructions were needed. I was very pleased with the quickness of delivery.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- rochelle from matawan, NJ
- Parts Used:
- 240338001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the door shelf snapped off and broke cheap plastic
took the shelf out of box. Opened the of refrigerator door placed shelf on door pieces that held it. pushed down on it, shelf locked it in 2 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gene from Chesaning, MI
- Parts Used:
- 240313703, 5304507146
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Freezer door sagged & didn't seal properly
Installed Metal hinge(old hinge was plastic) to take out sag of door.(painted the hinge color of refrigerator as hinge doesn't have plastic appearance cover )
Was this instruction helpful to you?
Thank you for voting!