WWSS2601KS1 Crosley Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- William from Corona, CA
- Parts Used:
- 240457701
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Refrigerator plastic cam broke
Watched the video....it was perfect. Just needed a Phillips screwdriver, needle-nose pliers and a 3/8 socket. The cam was shattered, so I had to pull it out the old, broken one with the needle-nose pliers. The whole thing took about 20 minutes. Really appreciate that video!
Was this instruction helpful to you?
Thank you for voting!
bins of doors broken
I looked up several company's offering Frigidaire parts. Your company was the cheapest. I ordered the parts around 3 pm one day and rcvd the parts the next day around 10 am. I was extremely impressed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Council Bluffs, IA
- Parts Used:
- 241993101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Orginal pin failed. I got tired of doing a balancing act with food on the shelf to take weight off the missing pin.
Just like the video. I had pulled all the parts of the old pin out of the frig months ago. I had tired to buy a replacement pin, but the local supply store could not get the correct part. I finally did a search and found your website. I was impressed with the pictures and the "how to" video.
Was this instruction helpful to you?
Thank you for voting!
Broken Crisper Drawer Cover and broken Crisper Cover Support pin
Following the video instructions provided by the web site, it took me less than 20 minutes to accomplish the entire repair. The video instructions were invaluable, because without them I would not be able to guess how the support part is mounted in the refrigerator’s wall.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Bella Vista, AR
- Parts Used:
- 5303918455
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Popping noise each time refridgerator door was opened.
Removed top hinge, lifted door off, replaced lower hinge bracket and cams. Replaced door. Part fit perfectly in spite of a design change. No more annoying popping noise.
Was this instruction helpful to you?
Thank you for voting!
Broken upper crisper drawer cover
Removed the broken drawer cover and replaced it with the new cover. Unscrewed the water filter cover, removed the old filter and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ron from Murfreesboro, TN
- Parts Used:
- 240350702
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Plastic frame brokem. Why, I don't know.
Removed glass top cover, installed new plastic frame, cleaned glass drawer top and assembled parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WALTER R. from SHEFFIELD VILLAGE, OH
- Parts Used:
- 242252702
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench (Adjustable)
Leaking from refrigerator
Had a leak every night from refrigerator couldn't understand where from. Went on line and found some articles. I was referred to this sight by ads the articles and then in how to. I was pleased that a customer wrote their own instructions on what to do it was more concise clear and made preparation easier. First label towel cup and bucket needed too. Turn off water supply and electrical cord unplug then remove cover behind refrigerator vacuum and clean then. Water makes a mess so clean dry first. Then mark your hoses to remember order. Next remove old inlet and put in bucket it's pressure clamps so push in and it locks I chose to suction pipes and check for damage to pipes pin holes etc next I inserted into new inlet in order. At that time I turned water valve on checked for leaks at initial insert and new inlet. Next I plugged in unit cord. Waited. No leaks so far left for 30 minutes ran ice machine and water dispenser waited 20 minutes no leaks yet. Unplugged refrigerator unit. Installed the inlet completely to base and closed back paper panel after wiping water. Waited 24 hours then smiled no leak. Job done so far 2 weeks all clear. Hope this helps you will need screws driver and wrench for copper or main line I did find same part for less but this sight help me with good instructions the one they provide is for engineers architects lol not me I'm DYI
Was this instruction helpful to you?
Thank you for voting!
Refrigerator light out
Once I had the right part, it was very easy. The bulb had melted to the part and blew the bulb. To change the filter was a breeze. Thank you for all your help in getting the right part.
Was this instruction helpful to you?
Thank you for voting!