Models > CNT15VX6A > Instructions

CNT15VX6A (AF01B) Crosley Refrigerator - Instructions

Jump to:

All Instructions for the CNT15VX6A

Customer:: Richard from Arlington, MA
Parts Used:: W11384469
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Both light bulbs had been replaced, but lights did not turn on.

I tried to remove the old light switch using a putty knife and a hammer. It was hard to compress the plastic tabs to pull it back through the hole, but all of a sudden, the lights came on. I guess banging on the switch freed-up the contacts. The new switch is now a spare part in case I need it.

Was this instruction helpful to you?

Customer:: Tom from Paducah, KY
Parts Used:: 833697
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

The freezer compartment was not cold enough.

I found the condenser fan was not working so I bought a new condenser fan kit and installed it. Fixed!

Was this instruction helpful to you?

Customer:: Mary E. from Chicago, IL
Parts Used:: 833697
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers, Socket set

Frozen Lettuce In Crisper

My husband put in in, no problem and all is well. My husband is a mechanic for large machinery/motors so installation was no problem. Thanks, better than buying a new fridge!!!

Was this instruction helpful to you?

Customer:: Nancy from Gallatin, TN
Parts Used:: 833697
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

condenser fan wore out

The kit I recieved was perfect. All parts fit and where a perfect match. I will give you an A+ in handling my order and shocked by speed of your delivery.

Was this instruction helpful to you?

Customer:: Chris from Greenville, OH
Parts Used:: 833697
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Socket set

Condenser motor stopped working

Removed bad motor with socket set and pliers then removed the connectors from the old motor and soldered them on the new one. Then installed new motor. Works like new! Problem Solved! Easy fix!

Was this instruction helpful to you?

Customer:: Honz from Tucson, AZ
Parts Used:: 833697
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Socket set

intermittent loud whirring noise

Moved fridge out from wall, unplugged power cord. Laid on floor, removed 6 screws from cover. Removed one threaded bolt to allow assembly to slide out. Removed special nut, and took fan off. Removed 3 motor mounting bolts. Unscrewed 2 wire nuts, and untwisted wires. (option 1, no ground) Vacuumed entire area around motor. Used 3 bolts to mount motor to holder assembly, and special nut to install fan. Stripped wires back about 3/4 inch. Twisted two wires together CW, and installed new wire nuts. Slid motor assembly back into slot,(keep wires away from blades) and used one threaded bolt to secure assembly. Reinstalled cover plate with 6 screws. Plugged power cord in to test air flow (out through cover vents). Moved fridge back into place. The loud whirring noise did not stop for a day; then quiet!

Was this instruction helpful to you?

Customer:: larry from indianapolis, IN
Parts Used:: 833697
Difficulty Level:: Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Socket set, Wrench set

not cooling

removed condenser fan -located behind refrigerator next to compressor, Not much clearance to work, there are 3 screws to remove from condensing motor,sounds easy but clearance is lacking to remove them ,(takes alot of PATIENCE). Then you have to remove the fan blades to be able to get clearance to remove motor!! I wouldn't reccommend trying this repair unless you are a pro.

Was this instruction helpful to you?

Customer:: john from white pine, TN
Parts Used:: 833697
Difficulty Level:: Really Easy
Total Repair Time:: More than 2 hours
Tools:: Screw drivers, Socket set

Fan motor stopped working

Well I could what laid on the floor and replaced it but I didn't I emptied refrigerator laid it over change the motor then stood it back up actual work about three hours

Was this instruction helpful to you?

Customer:: Timothy from Granite City, IL
Parts Used:: 833697
Difficulty Level:: Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Wrench set

Not cooling properly/ door divider getting hot.

The video of the repair is a helpful guide, but my refrigerator has the compressor very close to the condenser fan motor. With the compressor comes the copper tubing that is all in the way. I had to carefully bend them now and then to allow me to get my hands in position. The how to is easy, but the working with tools in cramped quarters was difficult. I think my Maytag side by side model makes for this job to be difficult, maybe yours may not be so bad. I took a couple of hours to complete. After the first hour, I covered the bare wires, and plugged the frig back in so it could do some cooling. I placed a small in front on the condenser to blow across it. Had a little break, then finished the job.

Was this instruction helpful to you?

Customer:: James from Sacramento, CA
Parts Used:: WP61004888
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Temp in the refrig side was too high. Freezer OK

I unpluged the refrig, removed the shelves and the back panel on the freezer side of the unit. This exposed the fan motor and fan blade. I removed two screws holding the fan unit in place, unpluged the wires connecting the fan unit to power, and then removed two other screws securing the fan motor to the bracket. I removed the fan motor blade from the old unit and installed it on the new fam motor. I replaced the fan unit into the bracket, pluged the wires back into the fan motor and secured the motor to the refrig. Replaced the back panel and shelves, pluged the refrig into the wall.....easy.

Was this instruction helpful to you?

Customer:: patrick from livonia, MI
Parts Used:: 833697
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers

condenser motor broke

opened box,read directions,took out bad motor,installed new one.PRESTO CHANGO way to go.

Was this instruction helpful to you?

Customer:: Don from Laramie, WY
Parts Used:: W11384469
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins

Switch didn't work

followed the video as instructed. Saved two repairman calls, one to find the problem, one to install. Net savings was about $130.00

Was this instruction helpful to you?

Customer:: Steve from River Edge, NJ
Parts Used:: W11384469
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

exchange of defective light rocker switch

1)pry out the old/defective light rocker switch with a screw driver (flat head) and pull out the cables 2)unplug two connectors at the end of light rocker switch 3) connect new light rocker into two connectors 4)push the wires inside and put back new light rocker switch

Was this instruction helpful to you?

Customer:: Anthony from Fairport, NY
Parts Used:: W11384469
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Light in the refrigerator didn't work

I did exactly as the video showed. I popped out the old switch, disconnected the two terminals, connected the new switch and put it back. The light now works! The refrigerator is over 25 years old and the switch works! What a great website this is. Couldn't of done the job without Partselect's help.

Was this instruction helpful to you?

Customer:: Dora from Rock Island, IL
Parts Used:: W11384469
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

light would come on and off

Viewed the viedo - it showed what to do

Was this instruction helpful to you?

All Instructions for the CNT15VX6A