AB2526PEKW3 Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Fred from Watertown, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
19 year old light switch broke
Great service. Unpluged old switch and pluged in new one. Works great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carlos from haverstraw, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Replace Bad Switch
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hinsdale, IL
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Light switch cracked Mounting
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from middle island, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light would work intermitently
removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Henry from Laurel Park, NC
- Parts Used:
- WPW10326469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The center support rail (plastic) for the crisper bins broke at the front end support plate. No obvious way to fix it.
I easily identified the needed part from the diagram on the PartSelect.com site and ordered it. It arrived within three business days (standard shipping). It simply popped into place in the respective slots in the bin frame--no tools needed. The whole process cost less than $11.00 with more than half of the cost going for shipping.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lucia from San Antonio, TX
- Parts Used:
- WPW10326469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Center rail was broken
Removed the crisper drawers and slip the rail back into position.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Jenkintown, PA
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lights didn't always come on when was opened
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Plymouth, MI
- Parts Used:
- WPW10326469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broke center crisper rail
No tools needed, just popped the old one out and slid the new one in.
VERY EASY!!!
VERY EASY!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Pittsfield, NH
- Parts Used:
- W10231344
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
old trim piece was cracked
gently pried out the old piece, slid the new one into position until it snapped into place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cecelia from Beaver Dam, WI
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
light staying on
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Smyrna, GA
- Parts Used:
- W11396033
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Frost in bottom freezer, freezer 8%, ice maker works
replaced electric control board, defrost for six hours. next day (24 hours) same problem, [email protected]
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Evelyn from Allenhurst, NJ
- Parts Used:
- WPW10326469, W10231344
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Missing Center Rail
Very easy.... no tools required everything just snapped into place didn't need all parts ordered but return for credit real easy.. All in all a very smooth experience. Followup emails gives great sense of confidence that help will be there if needed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from Paso Robles, CA
- Parts Used:
- WP67003854
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The old frame was cracked
I removed the drawers, glass shelf and the old frame. I had to remove several parts from the old frame and reinstall on the new one. It took a couple of minutes to figure out how to remove one part by prying with a small screwdriver. Otherwise, everything was straightforward.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Buffalo, NY
- Parts Used:
- W11396033
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Broke plastic tab on auto light switch
Used screw driver to pop out old switch. Used pliers to hold wire connection from fall back into slot on fridge. Inserted new swith into plug and pressed new switch back in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amy from Lenexa, KS
- Parts Used:
- WPW10326469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Center rail that holds drawers was broken
This refrigerator is one of our company refrigerators and takes a beating. The center rail that holds the drawers had been broken. The repair was as simple as sliding the broken rail out and sliding the new on in place. It was as easy as it gets.
Was this instruction helpful to you?
Thank you for voting!