ITZ500VW-P1322504WW Amana Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door handle was cracking and the roller balls from the side and center rail had cracked off.
I unscrewed the door handle and put on the new one. The Side rail for the crisper was also easily removed and replaced. The center rail was a problem. I guess I ordered the wrong part becaus the new rail wouldn"t fit. I had to cut off a piece for it to fit and now the humidigide no longer functions on that side. It was hard to pick the exact part from the diagram. But, the rail does fit now and the roller is again functional making the drawer glide easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Berkeley, CA
- Parts Used:
- WP12550109Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Broken Door Gasket
Emptied door shelves; removed umpteen screws (electric driver); replaced gasket and same umpteen screws; reloaded shelves. Didn't even turn off refrigerator. And, had great help from you (Sue) when I originally ordered the wrong gasket. Job was a piece of cake and your service outstanding.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cecelia from Beaver Dam, WI
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
light staying on
A very cold and brittle switch in a 17 year old fridge. Used screwdrivers to pry out with some resistance Had to cut the molded plug in half and split wires, because replacement contacts were farther apart than the original. End result, works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from Des Moines, IA
- Parts Used:
- 10253510Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Refrigerator Door Handle Broken
A staff member at the group homes installed the handles with no problems at all, other than the original screws were quite well seated, and took some time to remove them. The replacement was easy and faultless.
The only problem was that we received Freezer Door handles instead of Refrigerator Door handles. But it's all good - the freezer handles were looking a bit shabby anyway.
The only problem was that we received Freezer Door handles instead of Refrigerator Door handles. But it's all good - the freezer handles were looking a bit shabby anyway.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sharon from Niceville, FL
- Parts Used:
- 10253510Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken handle to refrigerator door
First removed the screws holding the broken handle in place, then placed the new handle in position and attached with the new screws. The part arrived the day following online ordering - very quickly!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WENDY from LOGAN, UT
- Parts Used:
- 10461901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Cover support was destroyed by dog.
I entered the model number and was easily able to find the replacement part I needed. It arrived two days later and I installed it and now my fridge works as good as ever. Thanks I felt so smart.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from St Charles, MN
- Parts Used:
- WP12550109Q
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Bad seal around the inside of refrigerator door
Loosened all the screws and pulled the old gasket off. It was fairly easy to get the new one in place. After I had it on it did not seal well so I had to use a hair dryer to get the seal tight.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Orleans, MA
- Parts Used:
- WP628356
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Broken ice maker arm mount
Pried out ice blade bar and removed broken water fill cup and replaced with new one.The whole repair costs $9.52 So I saved $ 190 over the cost of Appliance man visit!
It would have been $150& $50 for visit to replace ice maker unit.
It would have been $150& $50 for visit to replace ice maker unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from Fort Wayne, IN
- Parts Used:
- WP67001255
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ice bin had been lost
1. Removed part from packaging. 2. Cleaned part with foodsafe cleaners. 3. Rinsed thoroughly. 4. Dried thoroughly to prevent frost. 5. Placed bin in freezer. 6. Turned on ice maker. 7. Waited. 8. Discarded first batch to clear supply line. 9. Waited. 10. Enjoyed ice. 11. Provided these inductions.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- STANLEY from OAKLAND, NJ
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
rocker switch broke off
disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Jefferson Hills, PA
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Internal light did not come on each time the door was opened.
After disconnecting the electricity. I followed the instructions as indicated in the "HOW TO" article on the website. I used a steel putty knife and pried the light switch out of its retaining hole. I worked the right side the most since this is the side with the retaining clip. After I removed the switch I transferred the two electrical outlets to the new switch and easily snapped it into place. Engaged the electric power and tested the switch.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hinsdale, IL
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Light switch cracked Mounting
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Sebastopol, CA
- Parts Used:
- 10253510Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The refrigerator handle broke
We ordered the part, in arrived promptly, and my husband installed it with no problems.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennifer from Aurora, IL
- Parts Used:
- 10253510Q
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken Refigerator Door Handle
Extremely fast shipping. Ordered in the aftertoon, had item in hand the next morning. Easy installation, even for the mechanically challenged like me.
One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that the more work involved to write a review, the less likely people are to do so. Just a suggestion.
One suggestion though, when asking for a review, you should incorporate the Model Number within the email. I work on obtaining reviews for my company, and I have found that the more work involved to write a review, the less likely people are to do so. Just a suggestion.
Was this instruction helpful to you?
Thank you for voting!