BC20H (P7680805W) Amana Refrigerator - Instructions

I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.

Two screws was all that needed to be done. BUT, don't throw away your old handle insert as the new handle doesn't include one and would look funny without it.

Removed the screws...hold handle in left hand...replaces screws. Rocket science!

Part was easy to order, delivered quickly, installation very easy. Just unplug the unit, pop out the old swich using a screwdriver, disconnect and reconnect leads and pop switch back in. Definitely recommend that you can do it too.

Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.

removed old handle - 2 screws
switched insert into new handle - 4 screws
replaced with new handle - 2 screws

My owners manual said to unplug fridge from elec outlet, use a kitchen knife to gently pry off the switch plate
(manual had a pictoral example), unclip the two wire, replace with on new switch and replace the switch. Close
door and plug back in. Open door to check that the lite
works. Walla! It did. Thanks!

Sincerely, Ron Marshall, Billings, MT

I first removed the old handle...2 screws. Then I removed the name plate from it...4screws. Installed the name plate in the new handle and installed it on the door of the fridge. Quick and easy,tho not cheap.

unscrewed the old handle and put 2 screws in the new one. Only took about a minute

Popped the old one out with a kitchen knife and popped the new one back in. It tool less than 15 seconds!!

I unscrewed the insert from the broken handle, then screwed it into the new handle. Attached the new handle to the refrigerator. The old handle had been "fixed" by a handyman about a year ago but the break gave way again and I just bit the bullet and ordered the part.

Thank you for your extremely FAST delivery. I really appreciate.

removed white plate from old handle and attached it to the new. Put new on with two old screws. This was the easiest appliance repair ever! Part was received one day after ordering and immediately installed.

Received the correct part very quickly from Parts Select. Removed the door handle with two screws, and then removed the Amana Logo insert with four screws. Popped out the two handle spacers, and installed the insert and spacers on the new handle. Screwed the handle back onto the door. Perfect fit! Approximately 3 minutes.

I pried the old one out with a screw driver and pushed the new one in. I expected instructions in the box it came in but there were none.

I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.