ABB2522FES Amana Refrigerator - Parts

This is a replacement pan glide for your refrigerator. The pan glide can be found attached to the refrigerator shelf, and allows the pan to slide in and out efficiently. If your refrigerator pan will ...

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may...

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This kickplate grille is attached to the bottom of the refrigerator.

Long harness thermistor kit.

This is just the bottom glass cover for the crisper drawers. It does not include the frame.

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.

This is the replacement crisper pan for your refrigerator. It is made of clear plastic and is approximately 19 inches long, 18 inches wide, and 11 inches deep. The meat pan slides into the bottom of t...

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side ...

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.