PARB2517CW0 Amana Refrigerator - Parts

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.

This is the replacement crisper pan for your refrigerator. It is made of clear plastic and is approximately 19 inches long, 18 inches wide, and 11 inches deep. The meat pan slides into the bottom of t...

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side ...

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.

Holds the ice when it's released by the ice maker.

This wheel is sold individually. It is located on the bottom of the refrigerator.

This is a compression nut for your refrigerator/freezer. The compression nut is used with the plastic water line for the icemaker assembly. It is the connection between the water supply line and the o...

If there is ice build-up in the freezer you may need to replace the defrost timer.

This part seals the gap between the crisper shelf glass and frame to stop liquid from spilling into the drawer.