NT2136 (3H65A) Admiral Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Wanda from Discovery Bay, CA
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Top part of cycle dial broke off
I went on line and found this great company and thank goodness because I was using needle nose pliers to turn the dial.
I ordered the part and it was here within 5 days, I opened it up, screwed the dial onto the existing part and boom I was up and working again without having to use the pliers.
I wouldn't do it any other way when I have a problem from now on.
I ordered the part and it was here within 5 days, I opened it up, screwed the dial onto the existing part and boom I was up and working again without having to use the pliers.
I wouldn't do it any other way when I have a problem from now on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lester from Merrimac, MA
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
Original (Plastic) Timer Knob, broke in half.
Was able to unscrew the nut, which was still on the shaft, with an adjustable wrench and screw on the new knob.
The part was available, shipped in two days and arrived in three!
Not only is this knob METAL, but a perfect fit
The part was available, shipped in two days and arrived in three!
Not only is this knob METAL, but a perfect fit
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elmer from San Diego, CA
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Timer knob broke
The repair was very simple. Just screwed the new timber knob on.
I ordered the part on Tuesday. When I got home from work on Wednesday, there was the part. The order was placed for standard delivery. I've never hard a part delivered so soon. Thank, my wife was happy to have her washing machine down for just one day.
I ordered the part on Tuesday. When I got home from work on Wednesday, there was the part. The order was placed for standard delivery. I've never hard a part delivered so soon. Thank, my wife was happy to have her washing machine down for just one day.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kevin from COVINGTON, LA
- Parts Used:
- 833697
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
refrigerator stopped cooling due to condenser over-heating
Pull refrigerator out to access back, unplug unit and remove the 3 .25" screws cut the power leads to motor and install new with easy to understand instructions provided with new motor. Plug refrigerator back in and enjoy your cold beverages once more. EASIEST REPAIR EVER.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jim from Yucaipa, CA
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The wash cycle/on/off knob broke.
I used pliers to loosen the remnants of the old knob, then unscrewed it by hand. Then I screwed on the new knob, identical to the old one but better since it has a metal instead of plastic thread. Saved me a repair bill and waiting around half a day for a repairman to arrive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thea from San Jose, CA
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knob broke off - wear and tear I assume - Plastic
I guess I was real lucky - did not need any tools. Where the knob broke off it left a small piece still screwed on the post. I unscrewed the piece and screwed on the new knob and it was done. This knob has the middle (screw on) made of metal. It should last longer if not forever. :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Belhaven, NC
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
cooling fan quit
Ordered new fan motor on line took out old motor and replaced with new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curtis from Sedona, AZ
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Motor noise while running and clicking when shutting off
The instruction sheet supplied with the new motor described the steps to take very good. Replaced the rubber grommets for the three motor mounts also. A flashlight or light source was needed or was very helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Bel Air, MD
- Parts Used:
- WP61004888
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
motor wore out making loud noise
unplug the refrigator, remove everything from
frezer compartment. remove ice maker three screws and un plug. remove rear panel 4 screws
remove motor bracket from rear panel 4 screws
unplug motor . replace motor and reasemble in
reverse order. the new motor is very quiet.
frezer compartment. remove ice maker three screws and un plug. remove rear panel 4 screws
remove motor bracket from rear panel 4 screws
unplug motor . replace motor and reasemble in
reverse order. the new motor is very quiet.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from whitwell, TN
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set, Wrench set
fan motor had gone bad
I removed the nuts that held the motor mount, then removed fan blade, cut the wires, and slid the motor pass the mounts and the coil shroud, Installed motor in reverse order. worked out ok.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Milford, MA
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
freezer and food section too warm
removed lower back cover. diconnected fan ass'y electrical connection, removed fan housing (3 screws). removed fan motor from housing. cut old connector from fan and installed on new fan with wire nuts included. re-installed new fan to housing and re-installed housing to frame.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Al from Tonka Bay, MN
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Condenser Fan Failure
Partition between Freezer and Fridge was running very hot. (Warm is normal). Oiling fan did not work. The only problems encountered in the replacement were getting fan out and in through coolant lines, cut plug off to accomodate generic fan wiring, getting the screws back in without cooking your hand on a hot compressor. Unit works great!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Howell, MI
- Parts Used:
- 833697
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
The door gasket was very hot which is caused by an overheated expansion line that runs along the area of the door gasket. This was caused by a failed cooling fan motor.
Pulled out the refrigerator and removed the two panels from the rear of the refrigerator. Removed the fan held in by four screws and unplugged the connector. Soldered on the original connector, installed the fan to the motor and re-installed the unit into the refrigerator. Then blew out and vaccumed the condenser coils.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from State College, PA
- Parts Used:
- 833697
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
Refrigerator would not stay cold
Removed rear cover to see non-operating fan - removed three mounting screws on the motor that were a challenge to access. Swapped fan from old motor onto new motor - one threaded nut on the motor shaft. Spliced new fan wires into fan wires of the wiring harness and mounted with three self-tapping screws supplied with new fan motor. Replaced rear cover and plugged it in! Now the refrigerator cools like new (1981 model side-by-side Admiral)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Walter from Brookfield, WI
- Parts Used:
- WP3362624
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
The plastic part broke off
Finding thr part: Sears Kenmore diagram was impossible to read.
My SinL recommended PartSelec; It was an easy search with a picture of the exact part needed.
The part arrived a few days later and the problem is history.
Thanks for your great service
My SinL recommended PartSelec; It was an easy search with a picture of the exact part needed.
The part arrived a few days later and the problem is history.
Thanks for your great service
Was this instruction helpful to you?
Thank you for voting!