Models > WFG520S0AS2 > Instructions

WFG520S0AS2 Whirlpool Range - Instructions

Jump to:

All Instructions for the WFG520S0AS2

Customer:: Glenn from ROANOKE, TX
Parts Used:: WP9758079
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Socket set

Gas oven would shut off mid cook

Removed grills. Removed bottom plate.
Removed flame shield.
Removed igniter, 2 hex head screws. Bottom one is a bit awkward. Disconnected wire. Installed new igniter. Careful not to drop stuff in the hole. Like a socket. I did

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Howard from CROWNSVILLE, MD
Parts Used:: WPW10299224
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

The hinge was mounted on the right . The screw to remove it got it's square head chewed up because of using the wrong ssize driver

I left the old broken hinge in place, & put the new hinge on the left side.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: WILLIAM from SAINT JOSEPH, MI
Parts Used:: WP9758079
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

WOULD NOT HOLD DESIRED BAKE TEMP

REMOVE BOTTOM OVEN PAN. REMOVE GAS DEFLECTOR. REMOVE GAS TUBE. UNPLUG WIRE. REMOVE TOP AND BOTTOM SCREWS ON IGNITER. REPLACE IGNITER AND REATTACH IGNITER SCREWS. RE-INSERT IGNITER PLUG. REPLACE GAS TUBE AND DEFLECTOR. REPLACE OVEN BOTOOM PAN.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lana from WATERVILLE, ME
Parts Used:: WPW10181986
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven stopped heating, error message stated heating element

Very easy. Pulled the stove away from the wall. Used a screw driver to remove the two nuts to release the heat sensor, disconnected the wire, removed the sensor. Inserted the new sensor, plugged back into the circuit. put the two nuts back.
Beware, if the first time you put the oven on, if the error message comes back up (mine did) push the cancel/off button, wait a few minutes, put oven back on. System probably needed to reset. Mine worked perfectly after.

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from BUFFALO, NY
Parts Used:: WP9758079
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven would lite once and after that it would just click 3 times and nothing, click 3 times and the same thing!

Removed the bottom pan and heat shield plate, removed the drawer to get to the igniter disconnect the one wire from it and removed it and just repeated the same process backwards to put the new one in. All under 15 mins

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from BURNSVILLE, MN
Parts Used:: WPW10181986
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Oven Temp inaccurate

I watched the repair video on this site and another on YouTube before I started. The rear panel has a different shape and two additional screws on the bottom edge. The power clip was easy to manipulate.
This was an easy fix for a seventy year-old like me!

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joseph from KENT, OH
Parts Used:: WPW10299224
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Oven door hinge spring was broken and made the door heavy to open and close

I took the door off the oven frame by releasing the hinge latches and lifting and pulling the door outward to remove it . Then I removed the glass outer cover by taking off the philips screws and then unscrewed the door hinges . I then reversed the order to replace it .

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Gary from PLUM CITY, WI
Parts Used:: WPW10181986
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

oven not keeping correct temp and sometimes would not relight when temp went dropped.t

Slid oven out and took back shield off unplugged sensor took bracket screw out replaced sensor with new one.

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from EDEN PRAIRIE, MN
Parts Used:: WP9758079
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Igniter stopped sparking.

I ordered the exact replacement igniter through the website. I removed the oven bottom plate and the flame spreader to gain access to the igniter/burner assembly. I removed the burner from the oven to access the mounting bolts for the igniter. I replaced the assembly into the oven and reconnected the igniter wire and it was set!

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ralph from TEATICKET, MA
Parts Used:: WPW10299224
Difficulty Level:: Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Broken spring hinge

the door came apart fairly easy getting it all back together was another story lining up glass and panels that have already been heated was fun but its back together and working fine.... It should be noted that I have a warranty for the stove but the hoops I had to jump thru and the time it would take for the tech to come it was easier to do it myself!!

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from DEERING, NH
Parts Used:: WPW10299224
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Busted door hinge

Wrestled with it for ten minutes and then watched a youtube video on how to set the locks on the oven door hinges in order for the door to be installed. The video was instrumental

3 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ron from CARIBOU, ME
Parts Used:: W10817433
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

You

Pleaae prepopulate the manufacturer and part i purchased. I fix a lot of appliances so cannot expend the effort to decipher this.

Be well.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joanne from LAUDERHILL, FL
Parts Used:: WPW10299224
Difficulty Level:: Very Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Very hard to close the door range, especially one way and it sticks to close.

First, view videos to know what is an active door range problem.
Second, when you know the problem, see videos on you tube and be sure you will replace the right part
Third, I go to Part Select, see reference video for your problem if you need and buy the part on line, good price, very quick delivery.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: myron from west salem, WI
Parts Used:: WPW10299224
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Door hinge fell apart

Watched a video first. The repair was easy.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Donald from Sarasota, FL
Parts Used:: W11256444
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Range bottom drawer panel damaged. Needed to e replaced.

Pull drawer completely out from range. Drawer panel is attached with 4 screws. Remove two screws on top and two on the lower bottom. Remove panel. Leave protective covering on new panel to protect it from scratches. Attach new panel by replacing the four screws. Remove protective covering. Slide drawer back into range.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the WFG520S0AS2