Models > SF360BEEQ0 > Instructions

SF360BEEQ0 Whirlpool Range - Instructions

Jump to:

All Instructions for the SF360BEEQ0
106 - 120 of 129
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
L Allen from Savannah, GA
Parts Used:
8184859
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
trim on oven door rusting
First time was very difficult I tried to make the panel fit into the frame. Broke both side pieces of the trim.Even thouth I broke the trim PartSelect replaced them. I did not expect that.Second time it was easy. Remove the handle first and then the panel slides into the top and bottom only. It does not slide into the side of the frame but sits on top of it. Thanks, Allen
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rachel S from Dallas, GA
Parts Used:
4342528
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Igniter in oven not working.
Pulled racks and covers out of oven. Moved stove away from wall. removed bolts holding igniter. Disconnected wiring harness. Reverse process to install new part.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the SF360BEEQ0
106 - 120 of 129