WGE745C0FS05 Whirlpool Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- PATRICIA from REEDSVILLE, WI
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My burners were not working properly
It is just a matter of taking out the old cartridge and replacing it with the new on and it looks like a almost new stove. Works amazing.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeremy from Julesburg, CO
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
the old stove top insert quit working
it wen't fairly well, the old one popped right out and the new one slid right in no problem, till i turned it on and the wiring is wrong, the front burner turns on as it should, but when you turn on the rear, both burners come on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rose from ORFORDVILLE, WI
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace Burner
Took out the old, replaced with the new! Simple. Easy. Right part the first try!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward C from Parishville, NY
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My Jenn-Air had an old, very used element
with Jenn-Air, you just plug it in - just like that you have an almost new kitchen range.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lance from Northfield, IL
- Parts Used:
- WP7430P044-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Erratic oven temperature, would not hold a setting or would get to that setting and then loose it shortly afterward.
Removed two screws on sensor in the oven. Pulled out stove and after unplugging same removed the back panel. Sensor has an electric connection on the rear of the oven with a connection that is easily separated. Threaded new sensor electrical connection through inside of oven and connected on the back of stove. Pushed insulation back around the wire were in goes through to the oven. Replaced back on stove and screwed in two screws which hold sensor inside the oven. Replaced back cover on stove, plugged it in and pushed it back in place. Did the trick for me..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harry from Saint Marys City, MD
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old element cartridge no longer functions well, low heat
Lift large burner end of the element by the raised slot and pull old element out. Install the plug prongs of new element into cooktop plug and lower element in place. Done. My unit is 26 years old and I have replaced elements several times. I keep a spare on hand for replacement and the one I ordered is now my spare.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James Byrd from Delray Beach, FL
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Electric Eye became rusty and discentegrated ....
Unplugged old one ..... plugged in New one ! That' why I own 3 Jenn Air Ranges The oldest are both 27 years old and work and look NEW !
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Stephen from Annapolis, MD
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Conventional cartidge burners were 35 years old, starting to have power connection problems at the burner level.
Removed the 2 old cartidges and replaced them with the new ones in less than 2 minutes. Perfect fit! Worked immediately like a charm! We now have a new Jenn-Air! Received the 2 FedEX packages within 24 hours from our phone order. Phenomenal!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Durham, NC
- Parts Used:
- JEA7000ADSA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old and ugly from not cleaning up pot overflows.
Received units,unpacked, plugged in units turned on and started cooking. Now won't that EASY?
Was this instruction helpful to you?
Thank you for voting!