Models > GW395LEPB01 > Instructions

GW395LEPB01 Whirlpool Range - Instructions

Jump to:

All Instructions for the GW395LEPB01
61 - 71 of 71
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Michael from Waxhaw, NC
Parts Used:
WPW10179152
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Remove racks before self-cleaning
Similar to another customer, the racks were not removed before self-cleaning. The issue was that I AM THE HUSBAND and I admit that I did it. Ooops. Great price and if I do it again, I will go back to parts select to get a replacement.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frances from ROWLETT, TX
Parts Used:
WP8300802
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
After using the self-cleaning cycle on my range, the door wouldn't unlock and the electronic key board wouldn't work.
Order a thermostat and put it on and now it works. Took less than a half hour to repair. Very satisfied and probably saved myself over $200 if a repair man had done it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from Lake Geneva, WI
Parts Used:
WP8300802
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Used self cleaning and the thermol fuse burned out
Pulled out stove from wall..removed all silver screws that hold range back splash. Removed all black robertson screws that hold back panel...removed thermol fuse..2 wires and a blue fac on fuse. Hooked the 2 wires together to temp use oven. Got fuse from parts select and installed...easy easy easy....never will use self cleaning agai..
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GW395LEPB01
61 - 71 of 71