RRE2700W2 Whirlpool Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Marjorie from Indianapolis, IN
- Parts Used:
- WPY04100165
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
stove top burner would not heat
new element plugged into burner connection- an easy fix
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mark from Houston, TX
- Parts Used:
- 326793
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
burned out lower element
I unscrewed the element from the oven where the ends enter the back of the oven. I pulled out the element ends and unhooked the wire connectors being careful not to let them pull back into the oven wall. I connected the wire connectors to the new element, making sure that the front support was pointed down, and replaced the screws.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elaine from Atascadero, CA
- Parts Used:
- WPY04100165
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
center piece of the heating element broke off
so easy, just ordered the part, the part came and inserted the element into the stovetop
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Pittsburgh, PA
- Parts Used:
- WPY04100165
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
element shorted out
Replaced the element. The part came the next day which was great. Good customer service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Westport, CT
- Parts Used:
- WPY04100165
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
intermittent heat from burner
Pulled out electric heating element and replaced with new. I have had this frustrating problem for 2 years and after replacing the elements they now work like new! My only question, why did it take me so long to replace???
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edgar from Denver, CO
- Parts Used:
- 326793
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Burned out heating element
just as exactly as the video described. it was very ,very easy. i will for sure buy from parts direct again in the future and will recommend to my friends.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Burney D from Homosassa, FL
- Parts Used:
- 326793
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Bake Element failure
The bake element died after 20+ years. Turn off the power at the breaker panel. A Phillips head screw holds a plate over each side of the bake element. After unscrewing the plate, you will notice an electric lead attached to a female clip slips onto the end of each side of the element. BE CAREFUL not to lose the clip(s) in the insulation after taking off the male end of the old element! I used a clothes pin to keep the clip from slipping away. If the clip slips away you'll have to fish it out of the back of the oven and that means pulling the oven out of the wall. Sound like fun? I thought not. Take the opportunity to clean your oven also. That was the hardest part. Clip the end of the new element to each of the clips, right and left side, replace the plate and screw in the Phillips head screw. Turn back on the power in the breaker panel. Voila! Done!
Was this instruction helpful to you?
Thank you for voting!