MEF300PBWD Uni Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from Dover, TN
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Baking Element burnt into
unscrewed two screws, exposed wire connections. Disconnected two wires, then placed new element in oven and reconnected two wires, then pushed connectors back inside stove body. A acordless screwdriver made quick work of the two screws and the element works fine. Thank you for your quick delivery.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vicki from Strong, ME
- Parts Used:
- 316442300
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Surface Element burnt out
Lift stove top cover up and support cover so it will not fall down unplug element put new one in close cover and turn burning on and watch the burner get red hot. simple job why call a repair man in. Vicki
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Verona, AL
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Element in oven burned up
Watched the online video and followed the instructions. I unplugged the oven, used the nut driver to loosen the screws, removed the old element, hooked up the new element and voila... back in business. I received the part the next day after ordering it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greta from Ridgway, PA
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Bake element caught on fire, then wouldn't work.
Turned off electric to range, removed old element, replaced it with the new one, then turned electric back on. Super easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa and Marc from Fredericksburg, VA
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Element didn't heat
First the item we ordered arrived in 1 day, we were totally amazed!! My husband switch out the heating element and it worked!!!! Thank you for great service!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darlis from Greenwood, IN
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Bake element was bad
I had the old one out and new installed in less than 15 minutes and I would like to thank you for the promptness of your delivery
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from Sedro Woolley, WA
- Parts Used:
- 316075103
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Oven was not heating up sufficiently, we determined it was the lower element.
We turned off the power then unscrewed the element . After removing the element from the connectors we taped the wires to the oven so as not to lose them back into the holes. We attached the new element, pushed the ends into the holes and refastened the nuts. Very easy and now we are back in business.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Punta Gorda, FL
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burnt out Bake Element
I watched the video on your web site, and it couldn't have been any easier. This is the second major appliance that I've repaired using this web site, and your instructions have been perfect each time, as well as parts cost. I can't get parts at any lower cost including shipping! Excellent resourse here!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dawn from Warren, MI
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Oven bake element died
repaired in 5 minutes with my nut driver. So, so, so easy to make this repair. And never even attempted to call an electrician. Since long before I became an official widow, I say...who needs a man...
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Lockport, NY
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bake element stopped working after 17 years
Unscrewed the two screws which held element in place...pulled straight out...gently pulled connector terminals off....replaced with new element connecting element terminals ...sliding element back into place (make sure terminal connection is straight (ie NOT BENT) when pushing element back into original position)and screwing screws back in...DONE!!! EASY PEASY!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JEFFREY from HIGHPOINT, NC
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
bake element burnt into
removed the screw at the mount on each side of element .pulled old element straight out untill wire connector was out at the back of oven ..unplugged wire connector from each end of old element ..plugged wire connectors back into new element .pushed element plugs back into back of oven and installed each screw that holds element into place.. real simple
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jannetta from clarkton, MO
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
the bakely element was burned into in two different places
aftering watching your repair video the repair went very well we took the oven door off to make access easier. the worst part of the repair was getting the door back on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Lorena, TX
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Oven would not heat to temperature
Undo the two nut screws pulled out the element and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Spicer, MN
- Parts Used:
- 316075103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Element burned out; needed replacement
Followed instructions on YouTube and Frgidaire website. It looked easy; was easier than it looked -)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frances from Garner, NC
- Parts Used:
- 316075103
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Socket set
Bottom oven element no longer working.
Removed old element by taking out two screws at bottom rear of oven. Pulled element and wires forward from two holes and unclipped from wires. Clipped new element to wires and pushed the wires back into the holes. Then replaced the two screws. Needed flashlight so that 60+ eyes could see the screws and holes in the oven. A quick and inexpensive repair. Element was delivered very quickly.
Was this instruction helpful to you?
Thank you for voting!