Models > 31-2207-00-02 > Instructions

31-2207-00-02 Tappan Range - Instructions

Jump to:

All Instructions for the 31-2207-00-02
1 - 15 of 198
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
bryan from sparta, WI
Parts Used:
3051163, 3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
drawer glides were broke on front and back
used a screwdriver pushed the old ones out put the new in. the video instructions were great.
570 of 589 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeanette from Alpharetta, GA
Parts Used:
3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Front slide of bottom drawer broke off.
Inserted new slide as directed by video. Very easy and video was very helpful.
468 of 470 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Taylors, SC
Parts Used:
5303935058, 3051163, 3051162
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place
381 of 388 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph D. from Stuart, FL
Parts Used:
3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
broken slide
Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks
368 of 374 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Middleton, NH
Parts Used:
3051163, 3051162
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Bottom drawer broken
Frst I slid the drawer out.I then pryed the broken drawer glides off with a flat blade screwdriver. The new drawer glides then just snap into place,then reinstall the drawer and check for smooth operation.
148 of 273 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jennifer from La Habra, CA
Parts Used:
3051163
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
drawer was tilting and wouldn't slide open easily.
The old glides were broken off so I didn't know I needed these glides until I saw the parts section of the Manuel. When they arrived I snapped them in with no effort at all.
P.S. The shipping is fantastic here......i ordered on Monday received them on Tuesday. Now that's shipping:>)
75 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Timothy from Spring Valley, AL
Parts Used:
5304409888
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Cord was not tightened enough by delivery crew.
PF alarm appeared on display. Noticed clicking when cord was moved. Had arced for some time and melted original block. New part slightly different. Only has 3 lugs, old one had six. Stack using washers provided. Take note of colors before disassembly. Use caution while working through access opening. The edges are sharp. Only tools needed are phillips screwdriver, deep socket for lug nuts. Nut driver optional. Hope this is helpful.
95 of 148 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Noblesville, IN
Parts Used:
3051163
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replacing Broken Parts
The two back door glides were missing and broken (one of each), and needed to be replaced. Finding the parts online was MUCH easier than I expected,and the repair was remarkably simple. Parts snapped into place, the drawer had to be lined up, and it slid right into place. Very easy!
100 of 165 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
EDWARD from ONSTED, MI
Parts Used:
3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
plastic clips were cracked.
It was so easy my wife did it bu snapping in the new clips.
67 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tracy from Poulan, GA
Parts Used:
3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke drawer glide
This was very simple I just snap the part on no tools required. it took less than 2 seconds.
95 of 157 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Homer from Thomaston, GA
Parts Used:
3051162
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
drawer glide on bottom stove drawer broke
Snapped the new part into the slot the old one had been in.The repair including opening and closing the drawer took less than a minute.
69 of 130 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
louis from cuba, NY
Parts Used:
5303051140
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Broiler element burned out
Remove old element by removing two screws on back wall of oven, pull attached wires out about 6" and disconnect. Reverse to install, very easy. Of course the oven door makes it harder to get at things, but it all worked out. Partselect was the only place I could find the element since the stove is 18 years old. I love keeping appliances going as long as possible.
27 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from hollywood, FL
Parts Used:
5303935058
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
corroded terminals
was more of a job of splicing wires together than anything else. Loved the heat shrink electrical tubing
to put over the wires for insulation. used a hair
dryer. must buy more of that amazing stuff
22 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Lebanon, IN
Parts Used:
5303935058, 316442300
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
burner quit working
pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great.
26 of 39 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ALLAN from APACHE JUNCTION, AZ
Parts Used:
316067902
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
missing oven racks
order pcs fit perfect.
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 31-2207-00-02
1 - 15 of 198