Models > FEP310KV3 > Instructions

FEP310KV3 Roper Range - Instructions

Jump to:

All Instructions for the FEP310KV3

Customer:: John from Dover, NJ
Parts Used:: WP3148953
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

8 Inch electric burner not getting hot

I determined the problem by swapping the 8 inch burner with a 6 inch burner. the 8 inch got hot when connected to the 6 inch wire harness. This told me that the 8 inch burner was good. The 6 inch failed to get hot so I determined the next logical thing was the power to the 8 inch burner. I used a multi meter to determine that power was getting into the control unit but no voltage was getting out. The controller was bad. I ordered a new controller and after unplugging the stove, replaced the controller in about 10 minutes. (Critical part of repair is to unplug unit from wall -220 volts!)

Was this instruction helpful to you?

Customer:: Mark from Louisville, KY
Parts Used:: 814399
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Element terminal connection loose caused overheating and carbon buildup.

Sanded element contact, replaced connector block. The easiest part of the task was ordering the part online. You made it unbelievably easy. I was amazed!

Was this instruction helpful to you?

Customer:: JoAnne from Harrison, AR
Parts Used:: WPW10308477
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

oven element burnt out

unscrew two screws..took old element out, put perfect fit new element in,screw two screws back in.

Was this instruction helpful to you?

Customer:: Marilyn from Kings Park, NY
Parts Used:: W10196406RW, W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace drip bowls

I took the old bowls out and dropped the new bowls in. No problem.

Was this instruction helpful to you?

Customer:: Beth from Draper, UT
Parts Used:: W10856603
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Broiler element EXPLODED!

Yes... it exploded. Ordered the part which was delivered promptly. Installed in about 30 minutes with a helper. Just unscrew the 4 interior screws and a bunch of the screws (10 maybe?) on the back panel. Drop the back panel, remove the electrical connections from the broiler element and have your helper pull it out. Shove the new one in carefully through the insulation, attach the two electrical connections and reattach all the screws. Worked fine but smelled a bit as it burned off the new coating. About a 30 minute project.

Was this instruction helpful to you?

Customer:: L from Richardson, TX
Parts Used:: WP9761346
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

burned out coil

Simply slide out old coil by lifting cooktop pan; position new coil electirc elements in oven slots, slowly push in, then push coil tab into slot in pan for balance. No problems

Was this instruction helpful to you?

Customer:: kyle from Schwenksville, PA
Parts Used:: W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

rusted drip bowl

remove burner by hand and remove old drip bowl replace with new bowl inspect burner for ware and insert back into slot.

Was this instruction helpful to you?

Customer:: Misty from Glenn Heights, TX
Parts Used:: W10196405RW, WPW10256908, 4396923
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Purchased a house with a working oven, but without racks, broiler pan, and one missing drip pan

No real repairs, just replacement. Everything is good and now I can use my stove. Just in time for Thanksgiving!

Was this instruction helpful to you?

Customer:: Paulette J. from Connell, WA
Parts Used:: WP9761346
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old burner stopped working right.

Was able to unplug the old burner and plug the new one in. Very easy.

Was this instruction helpful to you?

Customer:: Eddie from Kaiser, MO
Parts Used:: WPW10308477
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

the heating element went out.

removed the two screws and unhooked the old heating element. I set the new element in place and attached the electrical leads and replaced the two screws and tested the oven.

Was this instruction helpful to you?

Customer:: Margaret from Vero Beach, FL
Parts Used:: W10196406RW, W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Drip plans needed replacement

Removed old ones replaced with new oned

Was this instruction helpful to you?

Customer:: James from Edgewater, MD
Parts Used:: W10196406RW, W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old Drip Bowls

Lifted out the old ones and inserted the new ones and my range top looks brand new now!

Was this instruction helpful to you?

Customer:: Dennis from Viroqua, WI
Parts Used:: W10196406RW, W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

none

I pulled out the burners, cleaned up the crumbled drip pans ,installed the new drip pans, pluged in the burners and was finished in about 3 minutes. I will order again from you. Thank you.

Was this instruction helpful to you?

Customer:: Anne Marie from Albany, NY
Parts Used:: W10196406RW, W10196405RW
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

my drip bowls were old an I was unable to clean them

I took the old drip pans out and replace them with the new ones. Now my stove looks brand new. These were a perfect fit.

Was this instruction helpful to you?

Customer:: Brenda from Scurry, TX
Parts Used:: 814399
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Old receptacle was burnt from lots of use.

Just cut the old receptacle wires and splice in new kit. Very simple and worked perfectly.

Was this instruction helpful to you?

All Instructions for the FEP310KV3