FGP215EW4 Roper Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ronald from WILLIAMSTOWN, NJ
- Parts Used:
- 4364147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
My center grill igniter was not working.
I removed the burners and top cover of the range. I pulled the range from between my cabinets so I could access the wires that go to the igniters. I removed the two screws from the igniter bracket and pulled the broken igniter up from the mounting frame. I cut the wire from the old igniter to make it easier to remove the old wire and route the new igniter wire to the rear of the range. The new igniter had the exact same plugin which made installation a snap. I reassembled the range top top and tested the new igniter. Works perfectly. It took less than 30 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roberta from Chicago, IL
- Parts Used:
- 4364129
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Missing stove knob
Put it in place! The website made ordering/selection painless.
Was this instruction helpful to you?
Thank you for voting!