Models > NEW3H8CVW > Instructions

NEW3H8CVW Norge Range - Instructions

Jump to:

All Instructions for the NEW3H8CVW

Customer:: Robin from Vanderbilt, PA
Parts Used:: WPW10245259
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

I had a power serge and it burned the Plug at the termial block and melted a few wire.

After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.

Was this instruction helpful to you?

Customer:: William from Florissant, MO
Parts Used:: WPY04000041
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

The original bake element burned out

1. Removed racks 2. Removed two screws holding in the bake element. 3. Gently pulled out the element exposing the two wires connected to it. 4. The two wires were held by a clip connection. 5. Removed the wire clips holding the wires. 6. Attached the clips to the new element and re-installed the element. New problem: The element did not heat up. A repairman informed me that the selector switch was damaged during the burnout- that switch was no longer manufactured and was discontinued. Whirlpool company was checked and indicated that there was a new part # 7403P023-60 but that was discontinued too. I was able to get the element working by moving the selector switch to the "Bake" position and then moving the switch about 1/4" in the clockwise direction. The element heated and the oven works at least for now as I search for a replacement part. PartSelect was an invaluable aid and helpful all along the process.

Was this instruction helpful to you?

Customer:: Judy from Framingham, MA
Parts Used:: 7801P030-60
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Somehow one of our oven racks was missing - maybe taken inadvertently from beside old refrigerator when it was removed.

We just installed the new rack in the oven. The amazing thing (after many unsuccessful attempts to find the correct rack) was having a friend recommend partselect.com. The gentleman I spoke to was extremely knowledgeable, helpful and efficient. We had our new rack 2 days after placing the order. We thought that kind of service didn't exist any more! Thank you so much. Now we can make 2 pizzas at the same time!!!

Was this instruction helpful to you?

Customer:: Matthew from Chippewa Falls, WI
Parts Used:: WP7803P058-60
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Broken Door Spring

Slid oven out from counters. On each side there are 3 screws on the front and three screws on the back holding the side piece on. Once off, the spring was very easy to get at and replace. I had only one broken, but replaced both anyways. I think it took longer to clean the sides of the oven that haven't been touched in years than to replace the springs. This job was very simple and easy.

Was this instruction helpful to you?

Customer:: William from APACHE JUNCTION, AZ
Parts Used:: 7403P067-60
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers

Oven light Switch

Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.

Was this instruction helpful to you?

Customer:: Max from Bothell, WA
Parts Used:: WPY04000041
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven would not heat up properly to set temperature

The element appeared to have been damaged. I replaced the element with ease. However, I still have the same problem. The oven does not heat up to the set temperature. Information from the part select website is that it is more likely the long oven sensor. I ordered one and will provide the results after I have this sensor replaced with a new one.

Was this instruction helpful to you?

All Instructions for the NEW3H8CVW