All Installation Instructions for Magic Chef Range 3621XPA

Customer:: Robert from LEXINGTON, MA
Parts Used:: WP74003019
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The bake oven element burned out

Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: TUONG from ALBANY, NY
Parts Used:: WP7403P255-60
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

selector switch not smooth and no heat on element

un-plug device from outlet for safety first and then remover all top panel after screws lower two side small screws. actually is not selector problem. It was burner switch problem for 6 inches element.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Tom from ROCKTON, IL
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Replace the lower oven element

Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bruce from SOUTHBURY, CT
Parts Used:: 12001676
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Socket set

Jennair cooktop with coils lost one of its coil guides.

We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Thomas from SAN DIEGO, CA
Parts Used:: WP7407P182-60
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers

Replaced upper over light and assembly

I had to pull out the oven and balance the oven on two patio tables. Remove the back of the oven. Pull out the light assembly which was burnt. I was unable to remove the casing around the light, so I destroyed it with a pliers. Reinstalling the new light and assembly was easy. What made this job difficult, I could not remove the light assembly from the front of the oven and had to go in from the back.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Marie from Fredericksburg, VA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Oven baking coil had burned out

Removed two screws from back of oven ,pulled apart old coil from wires, inserted new coil into the small metal pieces, pushed back and screws replaced. Really easy , anyone can do. Oh, I am 70 years old so probably people younger could do more quickly.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: TONI from SALISBURY, NC
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

element had cracked

First I cut the power to the stove. Then I unscrewed the two screws. Pulled the element out a few inches. I had to use pliers to disconnect it from its wires. It was a very tight fit. Then I reconnected the new element. Cut the power back and and fired her up. Boy did she burn like fire.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Wayne from Marietta, GA
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Element burned out.

Turn off breaker.
Unscrew old element, disconnect wires.
Connect wires to new element, tighten screws.
Breaker back to ON.
Done.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Hudson from Cockeysville, MD
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The element was completely gone.

Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bert from S. Easton, MA
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Bake Element Melted

Unplugged stove, unscrewed element pulled element out about 3 inces and disconnected element. Took model of stove looked on line for part. PartSelect had the best price and easiest web site to order part. Ordered part about 4pm and received part in 2 days. Took element out of box plug into connections and screwed the element back in. Plugged stove in and worked perfect.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Shelly from Allentown, PA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

fireworks in the oven. Burned completely in two.

My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connected the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from Overton, TX
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

element burnt into.

The part came quick and packed very well. I moved the stove out and un pluged it. opened oven door and took a philips screwdriver and took the screws out at the back of element..Slid it out with the two wires attached and unpluged the conectors. pluged the conectors on to the new element and slid it back in. Had a chocolate cake in 35 minuts.
Thanks, John in Texas

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: burton from prides crossing, MA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

hot spot in center of bake element appeared suggesting failure was imminent

pulled breaker,removed oven door,removed 2 screws,pulled bake element out 3 inches,pulled connections off,pushed connectors on new element,pushed new element back and replaced screws,replaced oven door ,pushed breaker back and turned on oven and let it heat up to 350 degrees.
Total time 10 minutes,even a caveman could do it.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Matt from Lewisburg, TN
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

BurntBaking Element Element

Turn Off the BREAKER!!!
Unplug the stove/oven
Opened the oven door
Unscrewed the baking element for the oven
Pulled the old element out about 3"
Disconnected the wire clip on both sides
Plugged the element into the clips
Screwed element back into place
Plugged oven in ,turned on breaker
PRESTO DONE

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lowell from Hardin, KY
Parts Used:: WPW10196405, WPW10196406
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Couldn't find correct drip bowls that fit.

Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

3621XPA Magic Chef Range - Instructions