Models > YKFED500ESS5 > Instructions

YKFED500ESS5 KitchenAid Range - Instructions

Jump to:

All Instructions for the YKFED500ESS5
91 - 105 of 173
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Wesley from Avon, IN
Parts Used:
JEA7000ADSA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Worn Oven Seal
If you have some mechanical ability it is a eazy fix, remove the 2 screws attaching door to oven, disassemble the back screws, and inner panel, remove oven seal, and reverse the process.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from New Plymouth, ID
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Baton Rouge, LA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
wire on one of the burners was frayed and exposed
took old burner out and put in new burner. No problem. Easy greasy
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenia from Miramar, FL
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace grill elements with convention coil elements
Easy as 1-2-3. Opened the box, took out the new electric coil elements, plugged it in to our stove and it worked perfectly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bintu from brinkley, AR
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
cook top is not working
i just order new cartridge and just plug in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frederick from Quincy, FL
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
didn't heat up as it should and pots would not sit level
just pull out moving fromm side to side until unplug from outlet
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JohnPaul from Ft. Bragg, CA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Annapolis, NC
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
none
no problem
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John Davenport from Upper Black Eddy, PA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Regan from Reston, VA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Coil Elements did not heat
The hardest part was making the commitment to sit down at the computer and order the parts! Part Select had the best prices and the best detail/photographs of the coil element cartridges. I felt confident that the parts would fit in my older model cooktop from the information provided. I ordered on Saturday, the parts were delivered by noon the next Wednesday. Order confirmation was provided as well as delivery tracking information. The parts were well packaged in a large outer box. The burner cartridges were in two smaller boxes within, securely wrapped in plastic and protected with styrofoam on the ends. I pulled my existing cartridges out of the cooktop outlets, cleaned the cavities below the burners and plugged in the new cartridges. Then, I turned each burner on to make sure they worked. I have been in awe at how easy that was ever since---it looks like a brand new cooktop!!! Everything was brand new and each cartridge came with a Jenn Air use and care manual. I am thrilled!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Toledo, OH
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My stove is a 1985 model and the coils did not heat evenly any more.
When I called to inquire if a new cartrige would fit in my 1985 model range the gentleman walked me through unplugging the old cartrige to see how it connected. I did this while on the phone with him and I then explained the connection; he told me that a new cartrige would just plug into the same place....and it did!
You had a great person at your service desk.
Thank you
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Neenah, WI
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
heating elements were old and not working
removed old cartridge and inserted new cartridge, less than 10 seconds. Wish I had replaced this cartridge several years ago. I have ordered a second one to replace the remaining old one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Greer, SC
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The original glass top shattered.
Easy as pie. Just wiped off and plugged in.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harriet from Coppell, TX
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from Trinity, NC
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
coil element not working
plugged the new one in and it was ready to use
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the YKFED500ESS5
91 - 105 of 173