Models > 79092402015 > Instructions

79092402015 Kenmore Range - Instructions

Jump to:

All Instructions for the 79092402015

Customer:: Paul from PORT ORANGE, FL
Parts Used:: 5304509869
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Stove was dropped and had broken, bent frame and adjuster feet

New ones fit perfectly. Take a minute to bend the frame straight. Then and I used oversize screws on the replacement parts as the drop had stripped out the screw holes of the frame.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Nelson from FRUITHURST, AL
Parts Used:: 316436000
Difficulty Level:: Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set

Old part was replaced by mfg’r. Wiring different. No drawings or any info was included to show wiring.

I was forced to call in a pro repairman. Will cost me at least $150 for part and repairman. I could have done job if instructions on how to rewire had been included.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: TRACY from NEW PHILA, OH
Parts Used:: 316490000
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Oven would not heat or sometimes hold heat to set temp

I was able to find the most common reason for my oven's symptom by searching online. I searched for the part I needed but was not confident that I would get the correct part until I looked on partselect.com. After verifying the part number with my owners manual and looking at the video on their website, I decided to order. PartSelect shipped the part as expected, and I was able to install it in less than 30 minutes. The only tool needed for installation was a nut driver. My oven is now working like new.

Many thanks to PartSelect for their comprehensive website and fine service.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: David from PALATKA, FL
Parts Used:: 316419137
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Had a F1 code on the range, could not control the bake temp.

Replace the electronic control board & overlay. Tested, works great!

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Herbert from MARIETTA, OH
Parts Used:: 316490000
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver

oven was over heating temp. of oven keep climbing

removed screws from back cover then pulled elect. plug apart. removed screw pulled out probe installed new probe put cover back on very easy only problem was that it said that 88% of time would fix the problem. will this time it didn't work oven still over heating.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ron from CINCINNATI, OH
Parts Used:: 316400601
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven bottom panel rusted away

Removed two screws removed and replaced panel.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lisa from APACHE JCT, AZ
Parts Used:: 316282100
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

There was no instructions. The wires don't match up old vs new. I read the reviews and this helped.

However the 1a 1b etc. Are very hard to see thus the need to magnify. Then it was easy.
I must say the guy I talked to was very nice.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Kimberly from OWASSO, OK
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

Oven temperature was not consistent.

I pulled the oven away from the wall, unplugged the cord, removed the back panel then removed the screw from the old sensor.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jeff from BELLEVUE, WA
Parts Used:: 316555800
Difficulty Level:: Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers

Element burned out

The original instructions were to replace burner and plug wires back in the same plug they came from.
The problem is that the plug order had changed between parts.
Use a pencil to highligt the plug numbers on both new and old plugset, to fint the new plug positions. And need to reorient one of the burners to allow existing wires to reach.

2 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Rhonda from PACHECO, CA
Parts Used:: 316404002
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours

wrong part received and returned

I wanted the bracket for the oven heating element and received the bracket for the broiler.... part returned and now I am stumped about what my next move will be

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Everett from Colchester, CT
Parts Used:: 318178110
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Element would not heat up

Removed 2 screws located underneath the front lip of the range top. Lifted range top and supported. Removed the 2 screws at either end of the support bracket. This bracket holds the elements in position. Be careful not to let the elements fall out when removing. The elements are now free to replace. Swap out the old with the new and be sure to reconnect the wires to the correct terminals on the new element. I did 1 wire at a time so as to not make a mistake at reconnecting the wires. Then replace the support bracket with the 2 screws and lower the range top in place and put back the 2 screws that hold the range top in position. VOILA!! Success. It works. The wife is now happy again:)

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: James from LAKEWOOD, OH
Parts Used:: 316575500
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Broken oven door cap.

Watched a video - piece of cake!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Kathryn from LAKELAND, FL
Parts Used:: 316400601
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Bottom oven pan was warped and discolored

Unscrew the 2 screws at the back of the oven bottom pan in the range. Place new oven pan in and rescrew the 2 screws. I could not get the two screws screwed back in. Since the bottom pan cannot move from its position, I felt like the two screws were not necessary.

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Craig from FAYETTEVILLE, NY
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Oven would not reach temperature or it would finally reach temp but would not stay warm.

Pulled oven away from cabinet area
Unplugged oven from wall outlet
Removed screws to free top panel from back of oven
Removed screws to free lower panel from back of oven
Probe backing was now exposed
Unplugged probe from connector
Removed one screw from probe housing
Twisted probe housing counterclockwise then pulled probe out
Reversed the process to install probe
Plugged probe into connector
Reversed the panel removal process
Plugged oven back in to wall outlet
Turned on oven and tested with no further issue

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Deane from WINCHESTER, KY
Parts Used:: 316490000
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

temp. probe

Easy watched on line video

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the 79092402015