All Installation Instructions for Kenmore Range 79046762908

Customer:: Sharon from Foley, AL
Parts Used:: 5304524341, 316538904
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken globe in oven and burnt out light bulb

Easy as 1-2-3

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: James from Williamsville, VT
Parts Used:: 5303935058
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Replace terminal block and burner unit.

Very simply following the online video instructions.

Was this instruction helpful to you?

Customer:: GEORGE from ADAMSVILLE, OH
Parts Used:: 316442301
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Weld Was Broken On Support Bracket On Element

Replaced element no problem?

Was this instruction helpful to you?

Customer:: sharon from Summerton, SC
Parts Used:: 316442301
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

element not heating right

Took old one out and plugged the new one into place.

Was this instruction helpful to you?

Customer:: Richard from Oro Valley, AZ
Parts Used:: 318255605
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

broiler element burned out

watched a U-Tube video on this subject.....worked like aa charm!!

Was this instruction helpful to you?

Customer:: Amy from Corona, CA
Parts Used:: 5304524341
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lens cover for oven light broke.

Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.

Was this instruction helpful to you?

Customer:: Marilyn from Dasssel, MN
Parts Used:: 316442301
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

burner was not heating properly

I ordered the element. When it arrived, I simply removed the old one and put in the new one. However, it did not completely solve the problem. The heat is now distributed evenly, but still have to turn the burner to 7.5 to boil water.

Was this instruction helpful to you?

Customer:: Robert from Waldorf, MD
Parts Used:: 5303935058
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Electric Range Element's Not Heating

Reviewed the online repair video a few times then got started. Although only two were bad, I replaced all four terminal blocks. I removed the range top instead of using the built in kick stands. this left me much more room to work and I was able to clean the top of the range really well before getting started. Wires for the back terminals where short and a little difficult to use after cutting off the old terminal blocks. The terminal block mounting option for my style range included with the repair kit would not allow me to utilize the screw for the third wire on the left rear burner. I used a drill to carefully widen the hole in the mount to make the original screw fit as there are no screws included with the kit. This added the extra time to complete the repair. Over all the repair was simple to complete but having to modify the terminal block mount was dissapointing considering the web site selected parts for my specific model number. Still a bargain compared to what a service call or new purchase costs. I will be reparing my ranges from now on.

Was this instruction helpful to you?

Customer:: Glenn from Fossil, OR
Parts Used:: 5303935058
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Replaced burner block

Looked at the instructions and cut the wires, put the new wires in the block, attached the block to the range, put the new wires to the range wires using the wire nuts. I plugged the element into the block turned on the power, tried the element and it worked. It was really a easy repair.

Was this instruction helpful to you?

Customer:: Judith from Sidney, NY
Parts Used:: 318372211
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

heating element didn't work

I did the repair in less then 5 minutes. I took out old element and put in new one and turned it on and I had heat. Works great Thanks the part came in 2 days what a wonderful suprise that was.

Was this instruction helpful to you?

Customer:: Charles from Kettlersville, OH
Parts Used:: 316442301
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

burner burned out

unplugged old burner plugged new one in

Was this instruction helpful to you?

Customer:: Valentina from Riverside, CA
Parts Used:: 5303935058
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Three terminal blocks burned out (disintegrated) on electric stove

First I want to thank Part Select for having the video online or I would not have attempted the repair. Also I saved over $75 on the parts!!!!!! It would have cost me $105 for parts and $125 for service tech to replace the burned off terminal blocks with new ones. Parts cost me $35 with shippiing, I did the repair saving me $195 !!!!!!!!! I replaced the parts as describied in the video and all is well. By the way, I got the parts in less than 24hours after ordering, cheaper than driving 30 miles to pick up overpriced parts !!!!

Was this instruction helpful to you?

Customer:: Robert from Greencastle, PA
Parts Used:: 316442301
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

8" left front surface element would no longer heat properly

I ordered the exact replacement element, and after unpacking it, it took about 5 minutes (actually,less; didn't time it), and the new element was installed and working fine.Thank you very much.

Was this instruction helpful to you?

79046762908 Kenmore Range - Instructions