66598009701 Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Craig from Parker, CO
- Parts Used:
- W10201551
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broiler element burned out.
Pulled unit from the wall and unplugged power cord. Removed the worn out broiler element from the upper oven compartment. Upon removal one of the wire connectors broke requiring removal of the back cover of the stove. Easily replaced the connector. Broiler element was ordered, reasonable price, and delivered surprisingly fast. Connected the element to the connectors, replaced the mounting screws inside, checked clearances on the rear of the unit and replaced the back panel. Plugged power in and tested perfectly. Mama is happy!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Newton, NH
- Parts Used:
- W10201551
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken element in the upper oven
Removing the backplate afforded easy access to the element connections. A few screws inside the oven hold the element in place.
Care needs to be taken not to scratch the floor when the stove is slid out to get at the back of it. I put lexan strips on the floor for the feet to slide on.
Care needs to be taken not to scratch the floor when the stove is slid out to get at the back of it. I put lexan strips on the floor for the feet to slide on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mitch from Pickerington, OH
- Parts Used:
- W10201551
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
The element started to melt down and was sparking
Just like some of the other stories - pull 4 screws, unplug the element and reverse. More imporantly, I received the part in 2 days
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bethaney from Carrboro, NC
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
lower bake element burned out
thank you everyone here for your posts which gave me the confidence to try this myself. Could not have been easier and I have zero DIY talents. Just as other have described, unplug oven, unscrew plate holding element, slip wires off of old and onto new and reattach. Perfect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from Lucerne, IN
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
bake element on lower oven stopped working
Took out two screws and carefully pulled out the element and removed the wires that were attached by clips. Put the clips on the new element and carefully pushed it back into place. Put the screws back and TA! DA! I was baking again.
Thank-you.
Thank-you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MARILYN from HILLBURN, NY
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Burned out lower oven heating element
It was real easy. Unscrewed two screws ( after shutting off electric circuit ) and disconnecting the electrical spade connections. Slid in the new element and reconnected the electric .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Craig from Sarasota, FL
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lower Oven heating element.
Remove two screws, unplugged old element and installed new element. Replaced cover plate with the two screws. Took less than 5 minutes and oven works great again. Very easy and straightforward.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Edmonds, WA
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Oven Wouldn't Heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches AND UNFORTUNATELY I DID NOT TURN OFF THE BREAKER TO THE OVEN AND THE LIVE WIRE TOUCHED THE SIDE OF THE OVEN AND A WHITE SPARK/EXPLOSION SCARED ME. LUCKY TO BE ALIVE AS I HAD NEARLY CRAWLED INTO THE OVEN WHILE DOING THIS. ALWAYS TURN OF THE BREAKER!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Lake City, FL
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken element
Turned off power at the breaker box. Removed the two screws holding elemet in place. Disconected The element, put the new one on. Replaced the screws turned the breaker back on, ready to bake. Finding the part was a breeze and the order came the next day after the order was submitted. I'll use them again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Worcester, MA
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Oven would't heat
First I switched off the braker. I removed the two screws that hold the element in place. Then pulled the element out and disconnected the two wires. I put in the new element screwed back the two screws, turned back on the braker and BAM! Start cooking immediately... Very easy to do and very fast service from PartSelect. I hope I won't need any more parts, but if I do, you are already on my favorites. Thanks guys.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Cheyenne, WY
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Element quit working
Removed 2 screws and pulled the element forward. Slipped off the 2 wires from the element. Installed the new element reversing the procedure. Piece of cake!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alfred from Susquehanna, PA
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Lower heater rod shorted and caught fire
Just had to remove two Phillips head screws. Pulled rods out, removed wires. Reverse to install. Tested and I was baking muffins again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Toni from Melbourne, AR
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lower Bake Element broke apart
Removed the two screws that held the broken element in place, pulled the element out and disconnected the two wires. Placed the connections on the new element and pushed it back in place and screwed it down. Turned it on and baked a cake. This was very easy. I am a 51 y/o woman and did this myself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jina from Gresham, OR
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Heating Element
Highly recommend this company for replacement parts! I was able to find what I needed without having to have the part number and info. After ordering I received the part in 2 days and replaced it in less than 10 minutes! Super easy and great transaction.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susan from Rensselaer, NY
- Parts Used:
- WP7406P428-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The Element on lower oven split
First we turned off the circuit breaker. Then we removed the oven door. Unscrewed the plate of the broken element and removed from the electric plugs.
We attached the new element to the electric plugs, screwed the plate into the oven. Turned on the circuit and I was back to baking Christmas cookies.
It was as easy as everyone else said it would be. It took about 5 min.
We attached the new element to the electric plugs, screwed the plate into the oven. Turned on the circuit and I was back to baking Christmas cookies.
It was as easy as everyone else said it would be. It took about 5 min.
Was this instruction helpful to you?
Thank you for voting!