91193498992 Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- suzanne from saint peters, MO
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
the oven would not turn off and the brake element was red in one spot
It was so eazy that I didn't have to ask my husband how to do it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darrell from Cape Coral, FL
- Parts Used:
- WB31T10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Obsolete appliance parts missing
Thank goodness for PartSelect.com
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.
When we moved into our home the microwave and electric range are obsolete appliances and were missing parts. PartSelect.com has pictures of parts on one inch grid pattern so I was able to select the hard to find parts that would fit perfectly and they did.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shirley from Antioch, TN
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Baking element burned through.
I shut off power at electrical box.
Then I removed 4 screws on back to expose connector enclosed in insulation.. It was not necessary as when I removed 2 screws in oven and pulled element out , the element came out far enough to disconnect easily and slip the element into electrical unit.
15 minutes start to finish..
Then I removed 4 screws on back to expose connector enclosed in insulation.. It was not necessary as when I removed 2 screws in oven and pulled element out , the element came out far enough to disconnect easily and slip the element into electrical unit.
15 minutes start to finish..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Rutherfordton, NC
- Parts Used:
- WB44T10010
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Replace bake element ( lower )
1ST..Cut power at circuit breaker.
2ND..Using nut driver, remove two sheet metal nuts.
3RD..Gently tilt element upward and pull out until wire connectors show. There are two wires with flat connectors, use the vise grips to hold the wires so they don't slip back behind the wall of the oven, if they do, you will have to pull out the range from the wall and retrieve them! ( I used two surgical hemostats for this.)
4TH..disconnect the old element, connect the new one....
5TH..Gently slide element back in place, replace sheet metal nuts.
6TH..reset circuit breaker
2ND..Using nut driver, remove two sheet metal nuts.
3RD..Gently tilt element upward and pull out until wire connectors show. There are two wires with flat connectors, use the vise grips to hold the wires so they don't slip back behind the wall of the oven, if they do, you will have to pull out the range from the wall and retrieve them! ( I used two surgical hemostats for this.)
4TH..disconnect the old element, connect the new one....
5TH..Gently slide element back in place, replace sheet metal nuts.
6TH..reset circuit breaker
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Jupiter, FL
- Parts Used:
- WB48T10011
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
needed an oven rack
slid it into the oven easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Savage, MN
- Parts Used:
- WB44T10010
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver
oven heat element lit up and started the oven on fire
impossible to repair, I would need to dis-assemble at least half of every part of the stove to get to where the element plugs in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judy from Boca Raton, FL
- Parts Used:
- WB44T10010
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench set
My oven heating element caught fire
I removed the old element and replaced it with the one that I ordered from Parts Select after reading your easy to follow instructions. I'm a 62 year old woman and it really was quite easy. Just make sure all electric sources are disconnected the breaker is off and follow the directions. The repairman would have charged me a minimum of $225. I did it my self for $60.00.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Catherine from Sernandina Beach, FL
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
baking element caught fire and broke into pieces
I removed the two screws in the oven and then pulled the stove out to remove the center back panel. This was easy to do once I found the right sized socket. Next I removed the two electric connections from the broken baking element and removed it from the oven. After I cleaned the oven it only took a couple of minutes to install the new baking element (connected the two electric connectors, screwed the two screws in the back of the oven, and replaced the back center panel). After that I plugged the oven in and tested the oven and it worked perfectly. Thanks for getting my new baking element to me so fast.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Exton, PA
- Parts Used:
- WB44T10010
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Oven would not heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Norm from Tallahassee, FL
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Oven temperature low. Took forever for the oven to heat up.
Turned off the power at the stove breaker. Removed all racks. Used nut driver to remove the two (2) mounting screws.Not knowing what's behind I gently pulled the old element out.I used two large heavy duty paper clips to hold the short power wires until I got ready to install the new unit.The procedure went really well.The unit works good and the temp is right in sync with a manual thermometer.By the way,I did remove the oven door first. Norm.T Tallahassee,FL
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Maceo, KY
- Parts Used:
- WB44T10010
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set
Bake Element Burned Through
Removed the bolts that were attached and gently pulled the element out. Removed the attached wires. Attached the wires to the new element and slid back up inside and tightened with bolts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Blanche from Owings Mills, MD
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Baking element burned out
First I unplugged the stove. Removed the screws that held the element in place. Removed the old element, then replaced with the new element. I plugged the stove back in. Everything went well.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Shawn from Lubbock, TX
- Parts Used:
- WB31T10015, WB31T10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace Drip Pans on Stove Top
Just removed the old drip pans and then inserted new ones...pretty dog gone easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Brooklyn Park, MN
- Parts Used:
- WB44T10010
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Oven would not heat, found that the lower element was broken
Removed the 2 screws that hold the element in place at the rear wall, disconnected the 2 stab on connectors, removed element. Replaced element in reverse order...done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel J. from Vernon, CT
- Parts Used:
- WB31T10015, WB31T10014
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Replace old burner bowls
It was easy to just replace the old burner bowls rather than try to clean them. The peices ordered from Parts Select were a perfect match and they arrived on a timely basis.
Was this instruction helpful to you?
Thank you for voting!