Models > 36272210101 > Instructions

36272210101 Kenmore Range - Instructions

Jump to:

All Instructions for the 36272210101

Customer:: Phillip from Pittsfield, MN
Parts Used:: WB34K10010, WB34K10009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace old discolored pans

I am retired Industrial Arts teacher with two masters degrees in education. I have 35 years of experience teaching children ages 12 - 18 to safely use woodworking tools and build furniture. I also have 40 years of experience in the remodeling and construction trade. This fix was fairly easy since I was able to draw on my vast experience that included repairing and rebuilding numerous machines and tools.
The Process: remove old ones replace with new ones.
I am very satisfied with my experience with PartSelect.

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Roscoe G from ROCHESTER, NY
Parts Used:: 40A15
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

Light burnt out.

Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.

2 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: JUNSOO from NORTHBROOK, IL
Parts Used:: WB28K10024
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins

Cracked the left burner tubes

I opened cook top without disassemble cook top and broke the left front tube.
After I received left front tube and disassemble cook top to install and found right front tube also not good condition.
I ordered right front tube and installed both tube. I recommend order both front tubes to save shipping.
The tubes were easy to install but little bit hard to remove old Electrode for disassemble cook top and to line up cook top and holder orifice screw hole for assemble.

Was this instruction helpful to you?

Customer:: Thomas from Burlington, OK
Parts Used:: WB20K8
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Oven Would Not Turn Off

Opened up the top of the stove using a screwdriver. Lifted it up about 3 inches and legs popped out on each corner and held it in that position. Traced the wire to the back and down to the oven. Pulled new thermostat along that route. When I got to the back it was a little tricky moving the thicker end around and down into the hole without removing anything from the back- but I did manage to do it. I then unhooked old thermostat from 2 clips, inserted new one and then went to the front and unsrewed the 2 small screws behind the oven control knob. Magnetic bit on screwdriver is a must! Pulled it back and removed wires one at atime and put onto new unit, then screwed it back in place and replaced knob. Plugged it in and turned it on. It came on ,stayed lit. Turned it off and it stayed lit- surprised me. . . . . . 25 Seconds or so and it went out. . . . . Job done!!

Was this instruction helpful to you?

Customer:: david from harrisburg, PA
Parts Used:: WB20K8
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Oven Would Not Turn Off

I read the instructions from other peoples repairs. One note: unplug stove, and turn gas off, remember where wires go. I didnt have to remove top of stove completly.

Was this instruction helpful to you?

Customer:: Jeff from Geneseo, NY
Parts Used:: WB20K8
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Oven would not turn off even though knob was turned off.

Unplugged stove. Removed the top rear panel to see where the thermostat cable fed into the oven. Left the current cable in place and fed new cable along side the old one. Pulled out the old cable once new one was installed. Attached wires to new thermostat and installed. Turned oven on to test. Everything went great.

Was this instruction helpful to you?

Customer:: Tracy from Nyssa, OR
Parts Used:: WB57K4
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers, Socket set

Range tipped over in back of our pickup on way home from the store shattering the door glass

Followed the instructions I found on this site - it went really well - exception was trying to figure out exact slots for glass to fit in on top. Looks great!

Was this instruction helpful to you?

Customer:: Rudy from Waterloo, IA
Parts Used:: WB20K8
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Thermostat knob broke off

Cut off the power. unscrewed the cover. fed the new thermostat inside the over and rescrewed. Feeding the line was the most time consuming finding the hole to insert it in the back of the oven.

Was this instruction helpful to you?

Customer:: Gary from Alameda, CA
Parts Used:: WB20K8
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

With the oven dial at OFF, the oven would turn on by itself every 5 to 10 minutes and it would heat up to about 100F and shut off.

Unplugged the range. Took out all the necessary screws and lifted up the cooktop cover. Unscrewed each gas tubes connecting to each gas burner's dial to allow more working space. Pulled out the old thermostat, installed the new one. Put back the gas tubes and all other necessary screws. Plugged the range and tested out the new thermostat.

Was this instruction helpful to you?

Customer:: Rebecca from Las Vegas, NV
Parts Used:: WB27T10469
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

no display

Turned off circuit breaker to stove, remove top panel and then the old control module and installed replacement. Power back on and top panel reinstalled. Easy!!! And Everything works like new!!!

Was this instruction helpful to you?

Customer:: Joan from Brooksville, FL
Parts Used:: WB34K10010, WB34K10009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Pans were old and looked it!

The repair was just to exchange however, I am still shocked with the delivery. I ordered one day and they were delivered one day later. I was amazed.

Was this instruction helpful to you?

Customer:: Greg from Ft. Washington, PA
Parts Used:: WB02K10254
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

needed to unstall "anti tilt" bracket on back of electric range to be code compliant for property..

Turned off circuit breaker, Then pulled out range, straight out and away from wall and cabinets. Layed braket on flooring and moved stove back in to make certain it aligned with range rear stands. Moved range back out, marked holes in braket, screwed in screws to anchor bracket. Pushed range back into placed against wall. Tried to |"tilt" range by pulling down on door after opened - range was held in place sre

Was this instruction helpful to you?

Customer:: Jeff from League City, TX
Parts Used:: WB34K10010, WB34K10009
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Drip Trays lost finish due to use

Removed grates, lifted old drip pan, cleaned well and put new drip pans in. Simple and looks SO MUCH better!

Was this instruction helpful to you?

Customer:: Stephen from North Las Vegas, NV
Parts Used:: WB16K10070, WB16K10055, WB16T10046
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

carbonized burners

Replaced all four

Was this instruction helpful to you?

Customer:: glen from felch, MI
Parts Used:: WB16T10046
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

uneven flame and sputtered, burner was not useable

Simple to correct 1. lift off grate 2. lift off burner cover 3. lift off old burner. 4. replace burner, cover and grate. took 10 seconds. burner works perfect

Was this instruction helpful to you?

All Instructions for the 36272210101