Models > 79092884300 > Instructions

79092884300 Kenmore Range - Instructions

Jump to:

All Instructions for the 79092884300

Customer:: Howard from Wolcott, CT
Parts Used:: 316220804
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Cover template to clock control replaced

I had to replace the clock /power panel on the stove. It did not come with a face oover. Both installations were fairly east once the problem was diagnosed. The control part did not show a face plate not included, or needed. I had to reorder the overlay . The job came out perfect and my stove looks like new again.

1 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Amy from Corona, CA
Parts Used:: 5304524341
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Lens cover for oven light broke.

Really a no brainer, but I do have to say that PartSelect customer service is excellent. My part was located and on it's way within a day and arrived a couple of days later.

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: patti from Greer, SC
Parts Used:: 5304503232
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Cracked inside glass

I actually watched Youtube while I was changing it. This video was not actually the same make up of my oven, even though the I typed in the model number. I manage to figure it any with the steps anyway. It was harder then I expected but not horrible. I think I did pretty well for a women. Patti

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Abe from Manson, WA
Parts Used:: 5304528972
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burner quit working

Received the new part FAST. Ordered online. Easy to plug in the new part. Will use PartSelect.com again when needed to order parts!

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Sue from Lampasas, TX
Parts Used:: 5304409888
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers

Control will not work - only clock blinks

Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Sharon from Foley, AL
Parts Used:: 5304524341, 316538904
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken globe in oven and burnt out light bulb

Easy as 1-2-3

0 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Kelly from Marietta, GA
Parts Used:: 316135401
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Largest burner was not operational

After turning off the power to the unit, we took it out of the countertop and unscrewed the base of the unit. We then unplugged the damaged coil and plugged in the replacement part. We then screwed the base of the unit back on and replaced the unit in the countertop. The largest burner now works.

Was this instruction helpful to you?

Customer:: Daniel from Provo, UT
Parts Used:: 316112005
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

Needed to install an anti-tip bracket on my stove.

Moved the stove. Used the template to position the bracket. Put the supplied screws to attach bracket to the floor. Slid stove back into place. DONE!

Was this instruction helpful to you?

Customer:: June from Mt. Vernon, AL
Parts Used:: 316067902
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old rusty worn out oven racks

Removed the old oven racks and put in the new ones.

Was this instruction helpful to you?

Customer:: James from Basking Ridge, NJ
Parts Used:: 316135401
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Element burned out in 15 months

Very simple, just removed three screws and pulled the top out and turned over and then removed the two screws holding the support bar. Removed and installed the element.Surprised to see that the element burned out in such a short time.

Was this instruction helpful to you?

Customer:: Kellyjean from Springfield, MA
Parts Used:: 316203301
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

broiler element burned out.

Unscrewed the old element (2) screws, then unscrewed the (2) brackets holding the element up, pulled the element out of the back wall of the oven unhooked the (2) electrical wires and left them hanging. Installation is in the exact reverse order.

Was this instruction helpful to you?

Customer:: John from Hemet, CA
Parts Used:: 5304503232
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

really bad ugly streaks inside of glass

open door,throw the door latches at the hinges and remove door. Take the out of the outer panel so you can separate the glasses. remove clip that hold the outer glass in place. I ordered a replacement glass as I never thought that it would come clean it looked so bad, but it cleaned up like new so I now have a spare glass for my oven door. Just reverse the way you take it apart to put it back together.

Was this instruction helpful to you?

Customer:: Kent from McHenry, MS
Parts Used:: 316436000
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

When turning the switch on for the large eye I could hear an electrical short behind the switch.

Initially we realized there was a problem while cooking with the large eyes and we began hearing an electrical short behind the control switch. I unplugged the power from the oven/cooktop and removed the back panel where I could visually see soot on the switches where it was shorted. Careful while choosing your part from the diagram on Partselect.com. For the model FEF336ECJ, atleast for my oven, the eye switches were reversed and I ordered the small eye's switches! Luckily they have an outstanding customer support and immediately mailed out the new parts and a label to send the wrong parts back. Changing the parts out was very simple. Pull the oven out and UNPLUG IT from any electrical outlet. Remove the back panel. Double check from the label on the front of the control panel that you are working with the correct switch, and before removing the current switch, remove the wires one by one and place them on the new part to make sure you don't misplace these wires. Once the wires are connected to the new part, pull the plastic knob off of the old switch to reveal the screws on front of the panel. Place the new switch where the old one came from and fasten the screws back in place. Replace the knob, replace the back panel(for safety) and test the new switch before you push the oven back into place. If you can turn a screw driver, move the oven, and unplug the power, this easy do it yourself repair will save you possibly hundreds by not calling a repair/handyman who would absolutely love you to pay out the nose for such an easy task.

Was this instruction helpful to you?

Customer:: charles from El Paso, TX
Parts Used:: 316067902
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Just had to replace the racks in the stove.

Did just want to comment on the customer service. It was great. The easiest to order that I have ever dealt with. Received prompt attention to the order and processing the same. JUST GREAT> Thanks

Was this instruction helpful to you?

Customer:: Richard from Fort Wayne, IN
Parts Used:: 316067902
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

old oven racks were nasty!

We recently purchased condo and WhiteWestinghouse range needed some love. the old racks were not in very good shape so we ordered new.

Was this instruction helpful to you?

All Instructions for the 79092884300