Models > 36271090301 > Instructions

36271090301 Kenmore Range - Instructions

Jump to:

All Instructions for the 36271090301
31 - 45 of 74
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Chris from MUNDELEIN, IL
Parts Used:
WB16K10026
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Burners were old and dirty
Simply removed old burners. Placed leveling nuts in place. Replaced new burners in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sherri from MORGANTOWN, WV
Parts Used:
WB16K10026
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Burner could not be cleaned any more.
Just lifted off the old burners set on the new ones.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Victor from LIMA, OH
Parts Used:
WB16K10026
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Wanted new burners for 24 year old gas range.
Simply took out old burners replaced them with new burners, no tools needed.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ERNEST from MANCHESTER, NJ
Parts Used:
WB35X37973
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
finish on old oven bottom was damaged
Ordered part from customer friendly Part Select and received the replacement part within a few days, and installed it promptly. Wife is happy and stopped grumbling about oven bottom unsightly defect! Small price to pay for a happy wife! Ernie
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Heather from Wauconda, WA
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burners were plugged
We bought our replacement burners from Part Select.com at half the price of another major appliance store. They came fast & fit perfect. All around, we are very happy.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Doan from Flushing, NY
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
burner did not light
just lift the cover and put it on.less than 1 minute.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carlos from Miami, FL
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Cracks in the bruner due to corrosion
I bought a new Doble Burner assembly and replaced the old ones.
Piece of cake.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Houston, TX
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
old burners were rusty and broken
I just lifted the old part and dropped the new one in. Everything fits perfectly. The new flame is a beautiful blue color.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Hyojin from Monmouth Junction, NJ
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The pipe that carry the gas to the ignition part was damaged, therefore the burner was not lightening up.
Just have to remove the old kit and replace it with the new one. No tool required.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
clare from north brunswick, NJ
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old burner assembly could no longer be cleaned
pop up range top. pull off old burner. put on new one.
close top. check for rocking. install leveling washer. check again. 2nd burner didn't require leveling so it was quicker.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from Warwick, RI
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken part
The key here was that I found the correcd part for an older kenmore oven and it was easily installed
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brenda from Franklin, NC
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
one of the stove top burners had burned all the way through
matched part needed on web site; took off burner; ordered part; received it on the third day and easily replaced it. Wonderful, easy, and very short delivery time! Thanks.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barry from Coventry, RI
Parts Used:
WB49K10037
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Deflector oven/gas flame deflector replaced due to hole melted from glowbar igniter
Removed oven convection fan cover for more room to remove/replace lower oven bottom. Deflector is attached underneath oven bottom and you will need new self tapping sheet metal screws to replace old ones. My deflector actually had hole melted in it from glowbar igniter directly underneath it. Glowbar remains white hot until selected oven temp is reached...poorly designed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alphonse from Glendale, AZ
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
We had to buy two dubble burner assemblies because one burner was out on each old assembley
The burner assembly was for my wifes daughter. She raised the top of the stove removed the old burners and set the new ones in place she also used the set washer and it works just fine.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Forestville, CA
Parts Used:
WB16K10026
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The double burner assembly had years of gunk so the burn was not clean.
The old double burners lifted off. Before the new burner could be set down into place, the area had to be completely cleaned using a flat blade screwdriver and damp rag. This allowed the new burners to seat properly in place. That is it.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 36271090301
31 - 45 of 74