Models > 36274624302 > Instructions

36274624302 Kenmore Range - Instructions

Jump to:

All Instructions for the 36274624302

Customer:: Kenneth from Las Cruces, NM
Parts Used:: WB16K10035
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers, Socket set

Oven not heating

Installation was very quick and simple. Removed wire connector for the igniter then hex screws for the bake tube. Attached the new igniter to the new bake tube and reinstalled in oven. 15 mins. I took the extra time to clean the oven pan and heat shields. Removed old charred baking spills and grease buildup. Oven is 12 years old and working like brand new.

Was this instruction helpful to you?

Customer:: Patricia from Brandenburg, KY
Parts Used:: WB08T10026
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Pliers

Oven light wire broken, damaged socket

Remove light bail, glass cover held by two nut screws. Pull socket, removed clips in back, replaced wire connectors, placed new socket in, then glass cover and bail. Wire connected in back, cover plate replaced.

Was this instruction helpful to you?

Customer:: Stephen from North Las Vegas, NV
Parts Used:: WB16K10070, WB16K10055, WB16T10046
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

carbonized burners

Replaced all four

Was this instruction helpful to you?

Customer:: John from Los Angeles, CA
Parts Used:: WB16K10055
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burner would not ignite.

Could not have been simpler. Burner head dropped into place and was held in place by gravity. Not possible for part to go in incorrectly.

Was this instruction helpful to you?

Customer:: Greg from Ft. Washington, PA
Parts Used:: WB02K10254
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

needed to unstall "anti tilt" bracket on back of electric range to be code compliant for property..

Turned off circuit breaker, Then pulled out range, straight out and away from wall and cabinets. Layed braket on flooring and moved stove back in to make certain it aligned with range rear stands. Moved range back out, marked holes in braket, screwed in screws to anchor bracket. Pushed range back into placed against wall. Tried to |"tilt" range by pulling down on door after opened - range was held in place sre

Was this instruction helpful to you?

Customer:: Mary from Redondo Beach, CA
Parts Used:: WB35X37973
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Wrench set

My oven bottom got rusty

I removed two bolts at the rear of the oven bottom. I pulled the old oven bottom out, and put the new oven bottom in. I put the two bolts back in and voila it looks like a new oven. Done in less than 15 minutes.

Was this instruction helpful to you?

Customer:: Johnette from Baltimore, MD
Parts Used:: WB48T10095
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

no racks to oven

Easily glide in.

Was this instruction helpful to you?

Customer:: Mary Ann from Granby, CT
Parts Used:: WB02K10062
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Plastic glide broke

The person I spoke to knew exactly what I was trying to describe. The part arrived in 2 days. 5 minutes later the drawer was back in place. I was glad I save the screw as the part did not come with one.

Was this instruction helpful to you?

Customer:: Damaris from Easton, PA
Parts Used:: WB48T10095
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Missing oven rack

I opened oven and pushed oven rack inside.

Was this instruction helpful to you?

Customer:: Vicki from Irvine, CA
Parts Used:: WB48T10095
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replaced damaged oven rack

I ordered the oven rack on a Tuesday and received it the very next day - was wowed at the service.

Was this instruction helpful to you?

Customer:: Arthur from Riverside, RI
Parts Used:: WB16T10046
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Hot Spot On Burner

Replaced old burner element with new, easy

Was this instruction helpful to you?

Customer:: Charles from Houston, TX
Parts Used:: WB16K10055
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replace medium burner for gas cooktop

Very easy to remove grates, burner cover and remove old burner head. Very simple process, but surprised that there was no efficient way to clean carbon deposits from my old burner. Burner video instructions on line insured I installed the new burner head correctly (actually, pretty hard to get wrong), and burner worked correctly immediately. Will likely replace other burners in time as the new one is so "silvery" colored compared to my other burners.

Was this instruction helpful to you?

Customer:: Bruce Lee from Carson City, NV
Parts Used:: WB16K10035
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver

No heat from Oven Burner. Alos poping explosion noise when burner ignited

I removed the bottom drawer, oven racks and bottom cover inside over, removed the screw at the front end of the burner. Unplugged the wire connector for the igniter. Removed the two retaining screws from the burner tube, removed from oven. Removed mounting screws from igniter to use on the new tube and igniter. Wire terminal did not match. Cut wire connector from old igniter, cut wire connector from new igniter. install old connector on new igniter with wire nuts.Install burner tube in oven. Connect igniter connector together. Reinstall over cover and racks. install bottom drawer. Turn on oven. Yah. It works. Their was a hold burned in the old burner tube causing the popping noise and finely not operating. Good to go. Bruce L Best Sr

Was this instruction helpful to you?

All Instructions for the 36274624302