9113618890 Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Frank from East Moriches, NY
- Parts Used:
- WB14X104
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
broken roller on hinge
I unscrewed the broken hinge, removed the tension spring and replaced the old hinge with the new one. total time 5 mins works great.
Was this instruction helpful to you?
Thank you for voting!
Nylon Roller On Both Hinges Wore Out
Watched the video and did exactly as it instructed. Very easy to do, took 10 minutes in all.
Was this instruction helpful to you?
Thank you for voting!
Oven door difficult to open, would only open 4-5 inches
Followed the video step by step, made the job simple and easy. Did not know there were springs attached to the lower part of hinge till watching video. Parts were genuine GE manufacturer parts which fit perfectly. Very helpful staff and great customer service. My model number did not match perfectly with others listed but the hinge part is identical.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- delbert from Auburn, WA
- Parts Used:
- WB14X104
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door hard to open and close
Pull the door off the hinges. pull drawer out of range.Take sping off both frame and hinge arm. Unscrew three screws holing hinge in palce. pull old hinge out , put new hinge in . reinstall screws, spring, drawer , and door. Get the wife to make cookies.
Was this instruction helpful to you?
Thank you for voting!
door won't open all the way
replaced both hinges in no time flat and it was easy to find the part and instructions on parts select. Thank you
Was this instruction helpful to you?
Thank you for voting!
Oven door wouldn't open/close properly; hinges offset & wheels broken
Followed YouTube video from PartsSelect. It was real easy to do and that video was helpful. Took off door by sliding it up off hinges, disconnected springs, unscrewed hinges & slid them out - reversed to install. Worked perfect, parts were exactly right and parts came within 2 days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Herbert from Tallmadge, OH
- Parts Used:
- WB14X103
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
hinge roller was worn out
Very,very easy. Just like the video described. Removed three screws. Released the spring and removed the old hinge from the slot. Slipped the new hinge in the slot,replaced the screws and reattached the spring. Job done! Great service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- frank from steger, IL
- Parts Used:
- WB2X9018
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Oven would not light
Unplugged from wall. turned off gas. removed broiler. removed burner assy. removed cover for electicial panel. unplugged igniter from electicial panel. removed screw for igniter from burner& installed new one.
Was this instruction helpful to you?
Thank you for voting!