Models > 101919582

101919582 Kenmore Range

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 101919582

Viewing 4 of 4
Backguard Section Diagram and Parts List for Kenmore Range
Backguard Section
Body Section Diagram and Parts List for Kenmore Range
Body Section
Cook Top Section Diagram and Parts List for Kenmore Range
Cook Top Section
Misc Parts Diagram and Parts List for Kenmore Range
Misc Parts
Keep searches simple, eg. "belt" or "pump".
Ignitor – Part Number: WP4392003
This igniter can only be used in place of round style igniters. This part ignites the gas within the dryer.
No Longer Available
Refrigerator Thermostat Sensor Barrier – Part Number: WP2196003
$9.40
The thermostat sensor barrier covers and insulates the temperature control thermostat capillary tube.
In Stock
Order now and your part arrives by Mar 21
Timer – Part Number: Y305020
This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
No Longer Available
DISCONTINUED – Part Number: 33521
No Longer Available
HOSE,TUB TO PUMP-DRAIN – Part Number: 27160
No Longer Available
Lock Nut, 10-32 – Part Number: 29216
$6.25
In Stock
Order now and your part arrives by Mar 21
Housing Asm – Part Number: 34945
No Longer Available
GC36 LEFT END CAP – Part Number: 37190
No Longer Available
GASKET-ELE – Part Number: 35114
No Longer Available
Main – Part Number: 33938
No Longer Available
DISCONTINUED – Part Number: 34100
No Longer Available
Starter Decal – Part Number: 36695
$6.25
Special Order
View More

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Val from La Habra, CA
Parts Used:
Y305020
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
The timer would not shut off the dryer.
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
Read less
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
gary from MANASQUAN, NJ
Parts Used:
WP4392003
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
no ignition, igniter not glowing, electricity good
easy even for an old man. Simply removed igniter bracket inside access door on the front and installed new part. Flex drive nut driver and 1/4" socket was all that was needed. Saved me a lot of money and time without the 25 year old dryer.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More