101919582 Kenmore Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Val from La Habra, CA
- Parts Used:
- Y305020
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
The timer would not shut off the dryer.
I Unplugged the dryer from the electrical outlet. Then took off the top panel. Then removed the nut holding on the selector dial, and removed the selector dial. I then removed the two screws holding the timer to the panel. Then I removed and installed each electrical connector from the defective timer, installing it on the new timer. Then reverse procedure to assemble the dryer.
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
The best part of the whole experience was the quick service I received from PartSelect. Thank you very much.
Val
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- gary from MANASQUAN, NJ
- Parts Used:
- WP4392003
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
no ignition, igniter not glowing, electricity good
easy even for an old man. Simply removed igniter bracket inside access door on the front and installed new part. Flex drive nut driver and 1/4" socket was all that was needed. Saved me a lot of money and time without the 25 year old dryer.
Was this instruction helpful to you?
Thank you for voting!