AG202MB Jenn-Air Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jean from Santee, SC
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burners would not light. Grates were warped
Ordered the part from you and received it on the third day. Simply unplugged the old assembly and plugged in the new one. Turned the control and the burners lit immediately. It was a piece of cake. The best part was a saving of near 100 dollars. I am extremely pleased.
Thank you,
Gene Guthan
Santee, SC
Thank you,
Gene Guthan
Santee, SC
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michelle from CAMBRIA, CA
- Parts Used:
- AG202MBA
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Had no use for the grill wanted 4 burners
Took out grill grates then took out cartridge ...replaced burner cartridge then attached spill pan then burner grates.... super easy
Note:.. center fan will go off AFTER you put drip pan in
Note:.. center fan will go off AFTER you put drip pan in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Sacramento, CA
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Updating from the original grill pack to add two more burners
After locating the new 2 burner cartridge set on the Internet, I ordered it from PartSelect and it arrived in just two days, the day before Christmas. It was super easy to install, after quickly removing the old grill burner and covers, by just dropping the burner cartridge and pan into place and putting on the new burner grates. They match perfectly the original cast iron grates that came with the stove 7 years ago! It is nice to now have four full functioning burners.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Poulsbo, WA
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
One 25 yr-old burner was beginning to leak gas because of corrossion. Decided to replace all 4 burners.
Remove grates and pan. unscrew each burner from the metal cross mount bar, keeping in mind, the position of the cross mount bar.(Mine was not reversible.) Reverse the procedure with the new burners.
Adjust the air opening to eliminate any yellow flame. The air opening is located immediately adjacent to where the burner pipe goes into the cooktop. (Near the front of the cooktop in my case.)
Biggest problem was making sure the correct parts were ordered.
Adjust the air opening to eliminate any yellow flame. The air opening is located immediately adjacent to where the burner pipe goes into the cooktop. (Near the front of the cooktop in my case.)
Biggest problem was making sure the correct parts were ordered.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Whitefield, ME
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
tube was rusted out
just removed two screws - took old unit out - put new unit in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- karen from Haymarket, AL
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted to replace my grill/griddle attachment with 2 burners
Ordering was a snap, and I received the part only a couple of days after I ordered it.
This was easier than installing a lightbulb! All I did was take the part out of the packaging and plug the gas burner assembley in, add the cover to the burners and add the iron burners plates on top. The entire thing took less than 5 minutes!!
This was easier than installing a lightbulb! All I did was take the part out of the packaging and plug the gas burner assembley in, add the cover to the burners and add the iron burners plates on top. The entire thing took less than 5 minutes!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Bangor, MI
- Parts Used:
- 74005189, WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Old burners were worn out and wouldn't light with the ignitor
Removed two screws and replaced burners and placed the unit back into position and the burners worked perfectly. Very easy. I think anyone could do this task.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- lenny from east freetown, MA
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
simple swapping of parts
Undid the bad part and installed the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clark from Tifton, GA
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burner wouldn't light.
Took out a couple of screws and put in the new part. PartSelect was fast and efficient. Highly recommended.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- judy from clifton park, NY
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
it was painless
just as stated before. Remove old burners from plate and reattach new burners.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Mary Esther, FL
- Parts Used:
- 74005189, WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burnner rusty and will not start with electric start.
Removed and installed burners in less than 15 min with just a nut driver. Replacing the burn ere did not fix the starting problem, but replacing them did improve the hurried flame.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marilyn from South Freeport, ME
- Parts Used:
- AG202MGA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The stove top parts were stained and unsightly. I did not realize but the burners did not light correctly--i just adjusted. I was about to have an appliance person come fix the burners I use most. The burners came with the tray and grates.
I removed the old burner assembly and replaced it with the new one. No tools necessary. The stove looks brand new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Caroline from Portland, OR
- Parts Used:
- AG202MGA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed to convert Jenn-air grill to burner.
This is a Jenn-air burner replacement or converter kit for the grill. It was basically a take out, put in scenario. It was quick and easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sara from Charleston, SC
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
12 yr old Jenn Air range top was awful
Took out old burner assembly and replaced with new parts. All done by hand and took about 3 min. Perfectly working old range looks new. Wonderful!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Chipley, FL
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
only one burner on the cooktop worked
Took two screws out of each burner and put new burners in and replaced the screws. A real piece of cake. and they work great. Did not even have to adjust the flames. They were all solid blue and perfect. Bill
Was this instruction helpful to you?
Thank you for voting!