AG202MB Jenn-Air Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Bonnie from Stillwater, MN
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
no repair just needed a cartridge
The cartridge came in the mail in just a few days (Thank you for such prompt service) I took the old one out and put the new one in, and now I have the 4 burner stove top that I've wanted for a long time. I was so happy to find your company and find the part I wanted. I had tried Jennair, with no luck, and it was wonderful to find your website and find exactly what I needed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marian from Milton, GA
- Parts Used:
- 3401X055-09, AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wanted to replace grill assembly with double burner assembly
Removed the 2 grates and drip pan. Then removed the grill heating element which just slid out. Slid the new double burner assembly into place. Replaced the new drip pan and grates! Very Easy!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debbie from Modesto, CA
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted 4 burners. I only had 2 plus a grill that we never used. So after calling all around to buy 2 more burners with no luck, I went on line, after two other web sites that wanted over $300.00 for them all in pieces, I found PartSelect they wanted only $199.00 and it was all together in one piec
Took the grill part out by hand and replaced it with the burner part by hand, took less then 2 min.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- thomas from Goodrich, TX
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
20 year old burners were slow to light and hard to adjust for our propane fired stove. And, they were scratched and ugly
Removed four screws; withdrew two burners; set two new burners in place; installed same old screws. That was it. When I turned them on to adjust the flame, they came on almost instantly and no adjustment was needed.
Wife loves the nice new look.
Wife loves the nice new look.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from HOLLISTON, MA
- Parts Used:
- WP7505P283-60, 74005189
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Part arrived broken.
Contacted customer service via email. Included a description of the problem as well as a photo that clearly showed that the Front Burner Assembly was, in fact, NOT an assembly when it arrived.
Nobody even acknowledged my email.
This was a $140 assembly.
Never again will use these guys for repair parts.
Nobody even acknowledged my email.
This was a $140 assembly.
Never again will use these guys for repair parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karyl from Atlanta, GA
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Gas Burner Assembly
I was advised to get a new stove top in order for my house to show well-(sellin my home).
I ordered the gas burner assembly took it from the box and placed the old one into the box the new one came in -took 2 minutes.
It looked phenomenal!!
I ordered another one just like it and added new knobs..now my counter top cookinig station looks BRAND NEW.
NO waiting for repair men who never show up on time,.Works much better than the other one and to think I did it myself.
Now my sister- in -law is doing the same.
LOVE IT!
I ordered the gas burner assembly took it from the box and placed the old one into the box the new one came in -took 2 minutes.
It looked phenomenal!!
I ordered another one just like it and added new knobs..now my counter top cookinig station looks BRAND NEW.
NO waiting for repair men who never show up on time,.Works much better than the other one and to think I did it myself.
Now my sister- in -law is doing the same.
LOVE IT!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- don from carnation, WA
- Parts Used:
- AG202MGA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed to replace JennAir grill with 2 burners
1. ordered replacement part from Partselect.com.
2. opened box
3. lifted out grill and burner assemblies from the cooktop
4. set in the gas burner assemblies, pan, and burners
5. tested burners.
Steps 2-5 took under 5 minutes total. No tools needed. Wife is happy, so I am too! Now I just wonder why I didn't do it 5 years ago when I bought the house with that worthless grill in place.
2. opened box
3. lifted out grill and burner assemblies from the cooktop
4. set in the gas burner assemblies, pan, and burners
5. tested burners.
Steps 2-5 took under 5 minutes total. No tools needed. Wife is happy, so I am too! Now I just wonder why I didn't do it 5 years ago when I bought the house with that worthless grill in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from COLORADO SPGS, CO
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Front burner would not light
Removed old burner, replaced with new one, works perfectly! Only one screw to take out and use with new piece.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JoAnn from Raleigh, NC
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
This item needed replacement for the 3rd time due to finish wearing off, within 6 months EACH time.
unscrewed previous unit, placed new unit and screwed in place.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Linda from BOLIVAR, TN
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Front burner wouldn't light because hole burned in metal tube that channelled gas to burner
So very easy!!!! I'm a 70 year old grandmother with a small socket set - and that's all I needed! Removed one small screw, removed old burner, popped new burner in, replaced one screw, and back in business! Placed order, received it in 2 days, fixed burner. So much faster than calling a repairman!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margot from Seattle, WA
- Parts Used:
- AG202MBA
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
I wanted to replace grill part with gas burner for cooking
I have received part in 2 days and replaced myself in less than 2 minutes. Super easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louis from Palm Coast, FL
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
didn't ignite gas range.
After getting help from customer support, I was able to order the part. I tracked the part on FED EXp.
After deliver the part was installed and working in 5 minutes. All that for less than $50.00.
After deliver the part was installed and working in 5 minutes. All that for less than $50.00.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John H from Newfoundland, PA
- Parts Used:
- 74005189, WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Burner Ports were worn and oversize
Removed the two screws that hold burners on mounting bracket . Removed burners and installed new burners. re-adjusted air flow to elimenate yellow flame.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Burma from Section, AL
- Parts Used:
- 3401X055-09
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The painted finish on the pan for my range started flaking.
Called Parts select and they replaced it in two days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Portland, OR
- Parts Used:
- WP7505P283-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Front burner inoperative
Simply removed the front burner using 1/4 incn nutdriver on
two screws.placed new burner in position and tightenwd two screws.
Simplest and easiest job I ever did!
Works as new!
two screws.placed new burner in position and tightenwd two screws.
Simplest and easiest job I ever did!
Works as new!
Was this instruction helpful to you?
Thank you for voting!