JEA8120ADB12 Jenn-Air Range - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mark from Corona, CA
- Parts Used:
- WP7920P201-60
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
Broke the glass top to my cooktop.
I went on-line to find the parts and found a handy schematic with a list of parts on PartSelect. It made finding the part really easy and I ended up paying for just the part I needed not the whole assembly. It saved about $300.00. Once I had the part the simple instructions were easy to follow and I had it finished up and in place on the stove in less thatn 15 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- frank from Mountain Top, PA
- Parts Used:
- WP7920P201-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
cracked cartridge dropped pan on it.
Easy swap out, no problems.
Great service
Great service
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from FLORISSANT, MO
- Parts Used:
- W10823693
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Heating element not working on one burner
Removed module replaced radiant element very easy repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from KENT, NY
- Parts Used:
- W10823702
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
Burner not heating
Took glass with both burners out as a single unit. Removed six screws to remove the pan from the glass top to get to the burners. Wires were easily disconnect from old unit. Replaced wires on new unit then putting the screws from old unit on new unit so the unit would fit properly back in the tub. Really really easy. Thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from KENT, NY
- Parts Used:
- W10823693
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Radiant burner not heating
Very easy just followed manufacturers instructions.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from HALLSTEAD, PA
- Parts Used:
- W10823702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Remove 6 screws, lift off glass, unplug burned out burner, plug in new burner, reverse order to put back together.
As above.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Annette from Jacksonville, FL
- Parts Used:
- WP7920P201-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Wanted to replace rimmed ceramic cooktop with rimless.
First off, the cost savings to replace just the glass top of the cartridge was over $400! My ceramic cooktop had a metal rim around the edge which prevented large pans from making contact. I looked into replacing the stove ($1,300 +) then just the inserts ($349 each). I did one last google search to find a lower price and Parts Select came up. I ordered the glass frame. It arrived the next day! It was so simple to chance out! Just removed the bolts with a nut driver, removed the old top and replaced it with the new top. On one of the cartridges the rivet holding the heating element had rusted out. Replaced it with a nut and bolt and was good to go.
Was this instruction helpful to you?
Thank you for voting!
burner cartridge terminal broke due to electrical shock. circuit shortage caused the problem.
dissembled the burner, remove the broken blocpk and bad spade.rewiered and assembled the burner.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mary from Baldwin, MD
- Parts Used:
- W10823693
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The rear burning on cook top cartridge would not work.
I unscrewed the glass surface from the bottom portion where the element lays. I gently unplugs the element and plugged in the new element. Then screwed it back together.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- SHARON from TORRANCE, CA
- Parts Used:
- WP7920P201-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
broken glass top on radiant heating cartridge
Easily unscrewed glass top and replaced with new glass top. Saved $300. Thank you for your service as my wife accidently came upon your site while looking for a replacement cartridge. She asked me to check if broken glass top could be removed (I never thought about this). problem solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Margaret from Savannah, GA
- Parts Used:
- W10823693
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
large element burned out on smooth top surface cooktop
I lived with a burned out element in my smooth top cooktop for a couple of years. When the second large element burned out, with a house full of weekend guest coming, I decided I had better do something. Checked out PartSelect, found the replacements. I am a 73 year old grandma. My grandson and I replaced the elements within 20 minutes and we were cooking for 16 people. Woo Hoo! Removed eight screws lifted off the glass top, removed two electrical clips, removed the old element and reversed the process X 2. Great company to deal with, fast shipping and I love the tutorials. Since August, we have repaired our old dishwasher and gas dryer. All with parts from PartSelect. Thank you PartSelect.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John E from Centreville, MD
- Parts Used:
- W10823693
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
There was sparking coming form the module and I when I took it apart I discovered that the burner itself was not the problem. The metal parts that held the burner in place had come loose and was shorting out against the 220 line.
I used a nut driver to take the module apart. When I discovered the problem I simply threw the module out but kept the ceramic top and then ordered a new stove top. The burners would be a snap to install if the clips that secure it in place had not ALL broken off. All you do is pull the wires off with a pair pliers and set the new unit in place and reattach the wires. All that would be left would be to reattach the ceramic top and set the module back into place on the stove top. The modules were discontinued and no longer available any place. Believe me I tried. The delivery to me from Parts Perfect was very quick and without any hassles. I had no problem returning the burner. I would recommend these people any time.
Was this instruction helpful to you?
Thank you for voting!
8 in element failed
unscrewed the 7 screws , un hooked one element at a time and reinstalled new element , rescrewed unit back together easy
Was this instruction helpful to you?
Thank you for voting!