Models > FCE2012B > Instructions

FCE2012B Jenn-Air Range - Instructions

Jump to:

All Instructions for the FCE2012B

Customer:: Robert from Jacksonville, FL
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Bottom Element Burned out

Turned off all power to range.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)

Reversed the process.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: tommy from FAYETTEVILLE, NC
Parts Used:: 12001656
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

No problem installing the sensor

I removed the two mounting screws and pulled the harness through the opening unsnapped the sensor from the harness and installed the new sensor i didn't have to used the adapters the new sensor fitted

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: James from Allyn, WA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Element burned in half

Took two screws out unplugged the element and plugged the new one in and replaced the screws and turned the breaker back on. Works great...Piece of cake..jk

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Joseph from Warwick, RI
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Bake Element broke

****Threw the breaker switch for the oven to the 'off' position****. Opened the oven. Unscrewed the phillips head screws at the back of the old element. Removed the connecting wire, taping them to the stove so that they wouldn't recede into the hole. Securely attached the connecting wires to the new element. Pushed the wires back into the holes in the stove. Removed the tape from the oven. Screwed the element into place. ****Threw the breaker switch back to the 'on' position****. Process took under 10 minutes.

DO NOT FORGET TO UNPLUG OR TURN OFF BREAKER BEFORE DOING ANYTHING WITH THE WIRES. Don't forget to turn it back on again when you are done.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paulo from Cambridge Springs, PA
Parts Used:: WP12001560
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Our original surface element caught fire!

Old surface element was removed simply by pulling it out of the electrical contacts. The, the new one was inserted.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Leticia from Sunnyvale, CA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

bakeing element caught fire.

First I turned off power to the range at the fuse box (very important-The last time I didn't do this and ended up paying a repairman $150.00 to replace the damaged connectors). I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the new element, pushed the element back in and replaced the screws. Turned the power back on and tested the element. The whole job took about 30 minutes because I had trouble disconnecting the old element. I used the flat end of the scrapper to push against the connector while I pulled the element out. Normally it would take only about 15 minutes.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Paola from High Bridge, NJ
Parts Used:: WP12001560
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Just plugged the burner in and it was good to go.

The burner wouldn't work. I just plugged in the new one and all was done.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Hudson from Cockeysville, MD
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The element was completely gone.

Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Bert from S. Easton, MA
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Bake Element Melted

Unplugged stove, unscrewed element pulled element out about 3 inces and disconnected element. Took model of stove looked on line for part. PartSelect had the best price and easiest web site to order part. Ordered part about 4pm and received part in 2 days. Took element out of box plug into connections and screwed the element back in. Plugged stove in and worked perfect.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: John from Overton, TX
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

element burnt into.

The part came quick and packed very well. I moved the stove out and un pluged it. opened oven door and took a philips screwdriver and took the screws out at the back of element..Slid it out with the two wires attached and unpluged the conectors. pluged the conectors on to the new element and slid it back in. Had a chocolate cake in 35 minuts.
Thanks, John in Texas

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Shelly from Allentown, PA
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

fireworks in the oven. Burned completely in two.

My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connected the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Wayne from Marietta, GA
Parts Used:: WP74003019
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Element burned out.

Turn off breaker.
Unscrew old element, disconnect wires.
Connect wires to new element, tighten screws.
Breaker back to ON.
Done.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Herbert from Neenah, WI
Parts Used:: WP74003019
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The oven heating element burned out like a lit fuse!

Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Robert from LEXINGTON, MA
Parts Used:: WP74003019
Difficulty Level:: Very Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The bake oven element burned out

Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Richard from BOULDER, CO
Parts Used:: WP74003019
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

Bake element burned out

Removed the failed bake element per the video linked in the Partselect email. Unlike the video on YouTube the PartSelect video shows that the bake element can easily be replaced through the oven door and it is not necessary to slide the range out and remove a rear panel.

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the FCE2012B